Abstract:High-speed $(\gt{\mathrm GS/s})$ medium-resolution (6-8b) ADCs are in high demand for wideband applications. The time-interleaved (TI) SAR ADC is widely used for its superior power efficiency. However, TI ADCs suffer from timing-skew mismatches that severely limit the performance. Some background timing-skew calibration methods rely on input derivative or input statistics such as autocorrelation [1] to detect timing-skew errors. These methods place limitations on the input signal, e.g., must be at high frequency, with large amplitude, have frequent zero crossings, etc. To be applicable to all types of input signals, some prior works inject a reference clock signal to sense the timing-skew errors [2–3]. Reference [2] injects the reference clock with slow rising edges to each interleaved channel. The timing-skew errors are detected by the difference of the injected voltages among channels. Nonetheless, it suffers from mismatches among different dither injection paths, leading to large residual timing-skew errors after calibration. Reference [3] injects the reference clock in the input common mode. However, common-mode voltage variations, as well as switch and routing mismatches among channels still result in large residual timing-skew errors. Furthermore, the periodic sampling in the calibration engine causes input impedance variation and generates spurs in the output spectrum [3]. To eliminate the residual errors and spurs, while maintaining applicability to all types of input signals, this work proposes a new background timing-skew calibration method that injects a dithered reference clock at the input buffer.

Time interleaved ADCs for high speed high resolution data acquisition system

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Time-Encoding Machine Based High-Speed Analog-to-Digital Converter

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

A 14-Bit 4 GS/s Two-Way Interleaved Pipelined ADC with Aperture Error Tunning

22.4 A 4.8GS/s 7-ENoB Time-Interleaved SAR ADC with Dither-Based Background Timing-Skew Calibration and Bit-Distribution-Based Background Ping-Pong Comparator Offset Calibration.

A 10-GS/s 8-bit 2× time interleaved hybrid ADC with λ/4 reference T-Line sharing technique

A 12bit 800ms/s Time-Interleaving Pipeline ADC in 65nm CMOS

A high-speed front-end circuit for high-resolution pipelined ADC's with a merged sample-and-hold amplifier

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

A 100mhz S/s, 7 Bit VCO-based ADC Which is Used in Time Interleaved ADC Architectures

A 14-Bit 500-Ms/s Time-Interleaved ADC with Autocorrelation-Based Time Skew Calibration

A 4-Gs/s 8-Bit Two-Channel Time-Interleaved Folding and Interpolating ADC

Time- and Frequency-Interleaving: Distinctions and Connections

Optoelectronic Hybrid ADC Based on Time-Interleaved Multi-Wavelength Pulse Generation

Design of a 12-Bit 200 MS/s Time-Interleaved A/D Converter

A 10-Bit 600-Ms/s Time-Interleaved SAR ADC with Interpolation-Based Timing Skew Calibration

8 bit 400 MS/s CMOS Folding and Interpolating ADC

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A Quadrature PLL with Phase Mismatch Calibration for 32gs/s Time-Interleaved ADC

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique