Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

Mass sensitivity of thin film bulk acoustic wave resonator based on c-axis tilted ZnO film

A Multiple Resonant Mode Film Bulk Acoustic Resonator Based on Silicon-On-Insulator Structures

Electrically Tunable Film Bulk Acoustic Resonator Based On Au/Zno/Al Structure

Lateral Field Excitation of Thickness Longitudinal Mode and Shear Mode with ZnO Based on Solidly Mounted Resonator

A Mass Sensor with High Sensitivity Based on Thin Film Bulk Acoustic Resonators

Analytical and experimental study on the second harmonic mode response of a bulk acoustic wave resonator

Processing chip for thin film bulk acoustic resonator mass sensor

Lateral Size-Dependence in UHF Mode-Coupled ZnO FBARs to Suppress Undesirable Eigen-Modes and Weaken Mounting Effect

Flexible magnetic sensor based on FBAR

Novel mode-coupling vibrations of AlN thin film bulk acoustic resonator operating with thickness-extensional mode

Material and Device Properties of ZnO-based Film Bulk Acoustic Resonator for Mass Sensing Applications

Process Optimization and Device Variation of Mg-doped ZnO FBARs

Quasi-thickness-shear waves in thin-film piezoelectric resonators of ZnO and AlN with tilted C-axis.

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

Film Bulk Acoustic Resonators Integrated on Arbitrary Substrates Using a Polymer Support Layer.

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Dual-mode Thin Film Bulk Acoustic Wave Resonators for Parallel Sensing of Temperature and Mass Loading

Analytical Study of the Film Bulk Acoustic Resonators Based on Single Crystal LiNbO3 with Different Crystal Orientations

The Analysis of Film Acoustic Wave Resonators with the Consideration of Film Piezoelectric Properties

The Simulation of Resonant Mode and Effective Electromechanical Coupling Coefficient of Lithium Niobate Crystal with Different Orientations