Abstract:Three-level NPC inverters have been widely used in grid-connected systems due to their superior performance compared with two-level inverters, but more switches lead to high fault probability. Meanwhile, the neutral point potential (NPP) fluctuation of the DC link is an inherent problem of three-level NPC inverters. To keep the three-level NPC inverter running stably after single-arm failure, a fault-tolerant control strategy based on an optimised space vector pulse width modulation (SVPWM) is proposed in this paper. Firstly, the common-mode voltage (CMV) of the postfault three-level NPC inverter is analysed and then the preliminary synthesis principles of the reference voltage vector are determined. Then, in order to ensure the NPP balance and the quality of the grid-connected currents, the reference voltage vector synthesis rules are optimised, a low-pass filter (LPF) and a hysteresis comparator are designed, respectively, to ensure the quality of grid-connected currents and effectively decrease the DC link NPP deviation. Finally, the simulation results show that the proposed fault-tolerant control strategy can realize the stable and reliable operation of the grid-connected three-level NPC inverter after single-arm failure, and the CMV can be reduced significantly, the quality of grid-connected currents is also improved. The proposed fault-tolerant strategy also shows good performance when the grid-connected currents change.

Analysis and control of fault tolerant operation of five-level ANPC inverters

A fault-tolerant T-type three-level inverter system

Fault tolerant operation of 5L-ANPC converter

A Short-Circuit Fault-Tolerant Strategy for Three-Phase Four-Wire Flying Capacitor Three-Level Inverters

Fault-Tolerant Control of ANPC Three-Level Inverter Based on Order-Reduction Optimal Control Strategy under Multi-Device Open-Circuit Fault

Reliability analysis and reliable operation of three-level ANPC inverter

Three-Level Active Neutral-Point-Clamped (ANPC) Converter with Fault Tolerant Ability

Analysis and Design of Active NPC (ANPC) Inverters for Fault-Tolerant Operation of High-Power Electrical Drives

Research on Fault Tolerant Control Method of Three-Level TNPC Inverter

A Novel Single-Stage Five-Level Common-Ground-Boost-Type Active Neutral-Point-Clamped (5L-CGBT-ANPC) Inverter

Recovering Partial Three-Level Operation in a T-Type Inverter with Fault Management Redundant Unit

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

A Redundant Unit to Form T-Type Three-Level Inverters Tolerant of IGBT Open-Circuit Faults in Multiple Legs

A novel fault-tolerant Shunt Active Power Filter and its control strategy

A Fault-Tolerant Control Strategy for Three-Level Grid-Connected NPC Inverters after Single-Arm Failure with Optimized SVPWM

Modulation Method for Single-Phase Six-Switch Five-Level ANPC Inverter

Topology and Control of a Four-Level ANPC Inverter

A Unified Fault Tolerant Control and Neutral-Point Voltage Balance Strategy for Three-Level T-Type Inverters under Double Signal PWM

A neutral-point potential balancing algorithm for five-level ANPC converters

Neutral-Point Potential Balancing of a Five-Level Active Neutral-Point-Clamped Inverter.

Multi-purpose Optimal Control Strategy of a Five-Level Active Neutral-Point Clamped Inverter Based on Zero-Sequence Voltage Injection