Abstract:Multilevel inverters with improved voltage quality are widely used in applications such as motor control and electric vehicles. The four-level active neutral point clamped (4L-ANPC) inverter effectively meets the demands for high power density and low device voltage stress. However, balancing the capacitor voltage and reducing its low-frequency voltage fluctuation are critical challenges that need to be addressed. To address these challenges, this paper proposes a "variable reference + zero-sequence injection" method that requires only three reference voltage signals to determine the injected zero-sequence components. Particularly, the expression of the midpoint current, regarding the modulation index and phase current amplitude, is theoretically derived. This reveals the fundamental connection between the zero-sequence voltage signal and the midpoint current, providing a theoretical foundation for the zero-sequence injection method in four-level inverters. Subsequently, a simulation model and an experimental platform of the 4L-ANPC inverter were developed to compare and analyze the waveforms of the upper and lower capacitor voltages, phase currents, and line voltages under different modulation methods. Additionally, the upper and lower capacitor voltage waveforms were examined for various modulation indices. The results indicate that as the modulation index increases, the low-frequency voltage fluctuation in the upper and lower capacitor voltages also rises. At a modulation index of 0.95, the "variable reference + zero-sequence injection" method effectively suppresses the fluctuation in the upper and lower capacitor voltages to be no more than 1 V. These experimental findings validate the effectiveness of the proposed method.

Topology and Control of a Four-Level ANPC Inverter

The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters

Topology and Voltage-Balance Control of a Single-Phase Active Neutral Point Clamped Seven-Level Inverter

A Novel Single-Stage Five-Level Common-Ground-Boost-Type Active Neutral-Point-Clamped (5L-CGBT-ANPC) Inverter

A Four-level Hybrid-Clamped Converter with Natural Capacitor Voltage Balancing Ability

Voltage Balancing Control of a Four-Level Hybrid-Clamped Converter Based on Zero-Sequence Voltage Injection Using Phase-Shifted PWM

Capacitor Voltage Balancing of a Five-Level ANPC Converter Using Phase-Shifted PWM

Topology and Control of a Five-Level Hybrid-Clamped Converter for Medium-Voltage High-Power Conversions

Neutral-Point Potential Balancing of a Five-Level Active Neutral-Point-Clamped Inverter.

Modulation and Voltage Balance Control of a Four-Level ANPC H-Bridge Converter for Ship Medium-Voltage Propulsion Systems

A neutral-point potential balancing algorithm for five-level ANPC converters

Multi-Objective Optimization Control of A Four-Level Hybrid-Clamped Inverter

A Novel Hybrid-Clamped Four-Level Converter

A Capacitor Voltage Balancing Strategy for a Five-Level Hybrid-Clamped Inverter

Capacitor Voltage Balancing of a New Five-Level Hybrid-Clamped Inverter

Multi-purpose Optimal Control Strategy of a Five-Level Active Neutral-Point Clamped Inverter Based on Zero-Sequence Voltage Injection

Simple Voltage Balancing Control of Four-Level Inverter

A New Five-Level Hybrid-Clamped Converter with Reduced Number of Clamping Devices

An Optimized Carrier-Based PWM Method and Voltage Balancing Control for Five-Level ANPC Converters

Topology and Control of Seven-Level Tree-Type Active Neutral-Point-Clamped Converters

A hybrid clamped multilevel inverter topology with neutral point voltage balancing ability