Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Low Voltage Organic/Inorganic Hybrid Complementary Inverter with Low Temperature All Solution Processed Semiconductor and Dielectric Layers

Low-power organic field-effect transistors and complementary inverter based on low-temperature processed Al2O3 dielectric

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Vertical Organic Electrochemical Transistors for Complementary Circuits

Low-Voltage Polymer Monolayer Transistors for High-Gain Unipolar and Complementary Logic Inverters

Flexible complementary circuits operating at sub-0.5 V via hybrid organic–inorganic electrolyte-gated transistors

Low-voltage organic single-crystal field-effect transistors and inverters enabled by a solution processable high- k dielectric

High-performance Inverters Based on Ambipolar Organic-Inorganic Heterojunction Thin-Film Transistors

Wafer‐Scale Organic Complementary Inverters Fabricated with Self‐Assembled Monolayer Field‐Effect Transistors

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

Complementary Inverter Based on n‐Type and p‐Type OFETs with the Same Ambipolar Organic Semiconductor and ITO S/D Electrodes

Low-voltage Zinc Oxide Thin-Film Transistors with Solution-Processed Channel and Dielectric Layers below 150 °C

A soluble and air-stable organic semiconductor with high electron mobility

All‐Solution‐Processed, All‐Organic Flexible Transistor and Circuit Based on Dry‐Transfer Polymer Films

One-volt oxide based complementary circuit

Organic Single-Crystal Complementary Inverter

Low-Voltage Unipolar Inverter Based on Top-Gate Electric-Double-Layer Thin-Film Transistors Gated by Silica Proton Conductor

Low-Voltage Printed, All-Polymer Integrated Circuits Employing a Low-leakage and High-Yield Polymer Dielectric

Editorial: High-Performance Organic Thin-Film Transistors

Low-voltage operated organic thin film transistors and integrated devices with photo-cured and patterned siloxane based organic–inorganic hybrid high-k dielectrics

Flexible Low-Voltage Organic Thin-Film Transistors Enabled by Low-Temperature, Ambient Solution-Processable Inorganic/Organic Hybrid Gate Dielectrics