Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Low-voltage organic single-crystal field-effect transistors and inverters enabled by a solution processable high- k dielectric

A Transfer Method for High‐Mobility, Bias‐Stable, and Flexible Organic Field‐Effect Transistors

Fully solution-induced high performance indium oxide thin film transistors with ZrOx high-k gate dielectrics

A Low-Temperature, Solution-Processed High-K Dielectric for Low-Voltage, High-Performance Organic Field-Effect Transistors (Ofets)

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

Highly Efficient All‐Solution‐Processed Low‐Voltage Organic Transistor with a Micrometer‐Thick Low‐k Polymer Gate Dielectric Layer

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Low-voltage organic field-effect transistors by using solution-processable high-κ inorganic-polymer hybrid dielectrics

Low-power organic field-effect transistors and complementary inverter based on low-temperature processed Al2O3 dielectric

Low-voltage Zinc Oxide Thin-Film Transistors with Solution-Processed Channel and Dielectric Layers below 150 °C

Low-voltage, High-performance Organic Field-Effect Transistors Based on 2D Crystalline Molecular Semiconductors

Editorial: High-Performance Organic Thin-Film Transistors

Low Temperature Cross-Linked, High Performance Polymer Gate Dielectrics for Solution-Processed Organic Field-Effect Transistors

Low-voltage operated organic thin film transistors and integrated devices with photo-cured and patterned siloxane based organic–inorganic hybrid high-k dielectrics

Low-Voltage Organic Field-Effect Transistors: Challenges, Progress, and Prospects

High-Performance Ultra-Low-Power OFET Based on Anodized TiOx Dielectric and Solution-sheared Organic Single Crystal

Low-voltage operating, high mobility top-gate structural flexible organic thin-film transistor with a one-step spin-coated binary polymer gate dielectric

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Sub-thermionic, ultra-high-gain organic transistors and circuits

Solution Processed Steep Subthreshold OFETs for Low-power and High Sensitivity Bio-chemical Sensing

Surface Modification on Solution Processable ZrO2 High-k Dielectrics for Low Voltage Operations of Organic Thin Film Transistors