Abstract:In this paper, design, fabrication and experimental analysis of a novel 4H-SiC pinched barrier rectifier (PBR) are presented. The operation mechanism of the pinched barrier is analyzed by numerical simulation and energy band diagrams. PN junction depth (X j ) and spacing (S) parameters in the diode structure are carefully designed to achieve a prototype optimal structure, and both forward and reverse characteristics are compared with those of JBS diodes by experimental results. It is demonstrated that, only by simply adjusting the PN junction depth and spacing parameters, the pinched barrier diode can obtain relatively optimal performance close to that of JBS diodes. The addition of channel doping concentration (N ch ) consideration for the structure design can achieve further improvements and superior performances than JBS diodes. In comparison with the optimum JBS diode design (S=1.2pm), for an on-set voltage control of 0.8V, PBR diode with optimum design sets of S and N ch can achieve a wider trade-off window (S≤0.8pm) between the device forward and reverse performances. Furthermore, PBR diode can achieve superior performance with lower forward voltage drop (1.3V) than JBS diode (1.6V) for the same reverse blocking capability (~1600V). The performance limit of PBR diode is also explored in this paper. For a minimum limit on-set voltage control of 0.6 V, a lowest voltage drop of 1.1V as well as a wide design window can be achieved.

Improved SiC JBS Rectifier Based on P+ Grids on P-well Structure

Optimization and Improvement of POP SiC JBS Diode Structure

Enhanced Conduction Characteristics in SiC IGBT with Floating P-Grid Shielded Thick Current Storage Layer

Investigation of Electrical Contacts to P-Grid in SiC Power Devices Based on Charge Storage Effect and Dynamic Degradation

Silicon Carbide Pinched Barrier Rectifier (PBR)

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

Low Switching Loss and Increased Short-Circuit Capability Split-Gate SiC Trench MOSFET with p-type pillar

An improved SiC SWITCH‐MOS with superior forward performance

A 4H-SiC p-channel insulated gate bipolar transistor with higher breakdown voltage and superior V F·C res figure of merit

1.2-Kv Planar SiC MOSFETs with Improved Short-Circuit Capability by Adding Plasma Spreading Layer

Improvement on short-circuit ability of SiC super-junction MOSFET with partially widened pillar structure

Sidewall-Implanted Trench Termination for 4H-SiC Devices With High Breakdown Voltage and Low Leakage Current

1.2-kV Low-Barrier 4H-SiC JBS Diodes by Virtue of P-Implants Across Dead Field of Current Flow

Fabrication and Characterization of Kilovolt p-Type SiC JBS Diodes With Enhanced Current Capability and Electroluminescence Phenomenon

A novel 4H-SiC pinched barrier rectifier

A New Lateral AlGaN/GaN Schottky Barrier Diode Combining with Floating Metal Rings and P-guard Rings for High Breakdown Voltage

Plasma Spreading Layers: an Effective Method for Improving Surge and Avalanche Robustness of SiC Devices

Trapezoid Mesa Trench Metal-Oxide Semiconductor Barrier Schottky Rectifier: an Improved Schottky Rectifier with Better Reverse Characteristics

Design and simulation of high performance β-Ga 2 O 3 super barrier rectifier with a current blocking layer

A New 4H-SiC Trench MOSFET With Improved Reverse Conduction, Breakdown, and Switching Characteristics