Abstract:Particles in universe may damage spacecrafts to malfunction,and triple modular redundancy(TMR)is an effective fault-tolerant technology.However,the existing TMR design is usually specifically customized for a given chip,it can as not be used in general.A novel TMR design scheme is proposed for VLSI gate-level netlist without considering the function.The scheme contains four design methods,which are global sequential elements TMR,local sequential elements TMR,global combinational logic cells TMR,and local combinational logic cells TMR.According to different libraries,the strategy also optimizes the drive capability.The proposed scheme is verified by a multi-core processor netlist.The experimental results show that,the area overhead of global sequential elements TMR is185% of that of the original netlist,and the area overhead of local sequential elements TMR 1%~80%of that of the original netlist.The scheme can be configured according to designers' requirements.Experimental data show that the delay introduced by the scheme on the critical paths is about 22.15%~22.86%,which is controllable for designers.And the scheme has a relative high reliability.

A TRM Control System Designed by Loongson MCU

The Control System of Jacquard Loom Based on MCU

An SET Hardened Dual-Modular Majority Voter Circuit for TMR System

TMR Hardening and Its Application in Control System

Modified Triple Modular Redundancy Structure Based on Asynchronous Circuit Technique

A Hardware-Assisted Software Synchronization Scheme in TMR

Design of Control System of Loom Machine Based on ARM

Triple modular redundancy design for VLSI gate level netlist

Controller of Magnetic-Vavle Controllable Reactor Based on DSP and ARM

The Design of Warp Tension Embedded Intelligent Control System Based on μC/OS and ARM

A high-level synthesis based dual-module redundancy with multi-residue detection (DMR-MRD) fault-tolerant method for on-board processing satellite communication systems

Embedded System for Warp Tension Control Based on ARM and Μclinux Architecture

Modular Design Method for Control of Reconfigurable Machine Tools

Design Of System Structure For Triple-Modular Fault-Tolerant Controller

Feedback-Based Low-Power Soft-Error-Tolerant Design for Dual-Modular Redundancy.

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

Study on Communication Strategy in Triple Module Redundant ETS System

Design and RAMS Analysis of a Fault-Tolerant Computer Control System

A New Task Model for COTS-based N-modular Redundant Systems

TRSTR: A Fault-Tolerant Microprocessor Architecture Based on SMT

TMR Group Coding Method for Optimized SEU and MBU Tolerant Memory Design.