Abstract:Presently, the torsional actuator has gained a lot of attention in the area of microactuators. Because the torsional actuator cannot carry a substantial mechanical load in the out-of-plane direction, it is frequently used in some optical or electrical applications such as light modulators and spatial scanner devices. However, the performance of the torsional actuator is limited to the fabrication process and operating conditions. For instance, it is difficult to fabricate a torsional actuator with both a large rotating angle and large size moving plate. A novel electrostatically driven torsional actuator is proposed in this paper. The torsional actuator is fabricated through the integration of surface rind hulk micromachining processes. Thus. the goal of fabricating a torsional actuator with a cavity right beneath the edge of the moving plate is reached. In addition, the thin film residual stress is exploited to modify the shape of the torsional actuator. The advantage of the proposed design is to increase the traveling distance of the actuator as well as to increase the area of the moving plate. In short, the proposed design provides the possibility of increasing the size of a moving plate without reducing its rotating angle, Therefore, the applications for the torsional actuator, such as image scanner and positioner, are increased. (C) 2000 Elsevier Science S.A. All rights reserved.

Torsional mirror with an electrostatically driven lever-mechanism

A rib-reinforced micro torsional mirror driven by electrostatic torque generators

The Improvement of Micro-Torsional-Mirror for High Frequency Scanning

Micro Torsion Mirror Actuated by Compound Electrostatic Driving Structure

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Electromagnetically Driven MEMS Micromirror with Torsion Beam Structure

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

Electromechanical Studies On Micro Torsion-Mirror Actuators With Monolithically Integrated Fiber Self-Holding Structures

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

A novel microelectrostatic torsional actuator

Torsion-mirror Actuators with Compound Electrostatic Driving Structures

The Improvement of the Micro Torsional Mirror by a Reinforced Folded Frame

Electromechanical and Optical Properties of Torsion-Mirror Actuators for Optical Switching Applications

Novel MEMS Torsional Mirror Optical Switch

Hybrid Electrostatic Actuator for Micromirror Tilting

Miniature Orthogonal Optical Scanning Mirror Excited by Torsional Piezoelectric Fiber Actuator

A Novel Type Of Vertical Torsion Micro-Mirror With Combs

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Design of a 2-DOF scanning mirror using flexible membrane and electromagnetic actuators

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application