Abstract:Switch mode capacitive pressure sensors are proposed as a new class of microfabricated devices that transform pressure into a mechanically switching capacitance to form an analog-to-digital signal with zero power, high sensitivity, and a high signal-to-noise ratio. A pressure-sensitive gold membrane suspended over a capacitive cavity makes ohmic contact with patterned gold leads on the substrate, closing circuits to fixed on-chip capacitors outside the cavity and leading to significant step responses. This function is achieved by allocating the switch leads on the part of the counter electrode area, while the remaining area is used for touch mode analog capacitive sensing. The sensor microchip is prototyped through a novel design approach to surface micromachining that integrates micro-Tesla valves for vacuum sealing the sensor cavity, showing an unprecedented response to applied pressure. For a gauge pressure range of 0-120 mmHg, the sensor exhibits an increase of 13.21 pF with resultant switch events, each of which ranges from 2.53-3.96 pF every 12-38 mmHg, in addition to the touch mode linear capacitive increase between switches. The equivalent sensitivity is 80-240 fF/mmHg, which is 11-600× more than commercial and reported touch mode sensors operating in similar pressure ranges. The sensor is further demonstrated for wireless pressure tracking by creating a resonant tank with the sensor, showing a 32.5-101.6 kHz/mmHg sensitivity with frequency jumps led by the switch events. The developed sensor, with its promising performance, offers new application opportunities in a variety of device areas, including health care, robotics, industrial control, and environmental monitoring.

A High-Sensitivity Integrated-Circuit Capacitive Pressure Transducer

A Capacitive Pressure Sensor with Adjustable Working Range for Deep Sea

A Novel Capacitive Micromachined Transducer for Micro-Pressure Measurement

A wireless passive pressure sensor with high sensitivity

Switch mode capacitive pressure sensors

The Design of a High Precision Capacitive Pressure Sensor Based on Comb Electrode

An Integrated Pressure Transducer for Biomedical Applications

Thick-film capacitive pressure transducer

A High-Accuracy, High-Speed Interface Circuit for Differential-Capacitance Transducer

High Sensitivity Capacitive Pressure Sensor with Bi-Layer Porous Structure Elastomeric Dielectric Formed by a Facile Solution Based Process

Highly Sensitive Capacitive Pressure Sensors over a Wide Pressure Range Enabled by the Hybrid Responses of a Highly Porous Nanocomposite

Capacitive Micromachined Ultrasonic Transducer for Ultra-Low Pressure Measurement: Theoretical Study

A Low Cost, High Resolution Interface Circuit for Differential Capacitance Transducer

Multi-sized Planar Capacitive Pressure Sensor with Ultra-High Sensitivity

Micropressure Transducer with High Over-Load Capacity

Development of a CMOS MEMS Pressure Sensor with a Mechanical Force-Displacement Transduction Structure

Highly Sensitive Seesaw Capacitive Pressure Sensor Based on SOI Wafer

High sensitivity capacitive flexible pressure sensor based on PDMS double wrinkled microstructure

An ultra-sensitive and wide measuring range pressure sensor with paper-based CNT film/interdigitated structure

Wearable Pressure Sensors with Capacitive Response over a Wide Dynamic Range

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure