Abstract:Influence of texture type on mechanical properties and the evolution of microstructure and texture is thoroughly investigated via uniaxial tension experiment along rolling direction (RD) at room temperature on two different AZ31 alloy sheets. Electron backscattered diffraction (EBSD) measurements on deformed samples confirm that dislocation slip is the main deformation mechanism in as-received sheet with a typical basal texture, while dislocation slip and extension twinning (ET) both contribute to sustaining plastic strain in the sheet with a rare RD-split bimodal texture, which is fabricated by equal channel angular rolling and continuous bending process with subsequent annealing (ECAR-CB-A). Therefore, these two sheets demonstrate obviously different texture evolution during plastic deformation. As-received sheet maintains basal texture and further experience the concentration of basal poles towards normal direction (ND). However, ECAR-CB-A sheet not only undergoes the gradual diffusion and rotation of tilted basal poles to ND but also the development of a new TD-component texture. The activation of ET variants in ECAR-CB-A sheet is confirmed to play an important role in texture evolution, and the number of activated ET variants is increasing with the increase of angle between ND and c-axis. In addition, acquired mechanics data demonstrate that ECAR-CB-A sheet possesses higher fracture elongation (24%) and lower yield stress (73 MPa) as compared to as-received sample. This issue can be ascribed to the participation of ET to coordinate plastic deformation along c-axis and the easier activation of basal slip in ECAR-CB-A sheet.

Effect of the Texture of Indium on Its Mechanical Properties

Effect of substrate on the texture of indium bumps

Effects Of Texture On The Shear Strength Of In Bump

A study of local mechanical properties of 304L SS welded joints subjected to cyclic straining using depth-sensing instrumented indentation

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

The Effect of Indenter Angle on the Microindentation Hardness

First-principles calculation of the effects of In doping on η-Cu 6 Sn 5 structure, elastic anisotropy, electronic properties and fracture toughness

Indentation Size Effect: a Study Via the Mechanism-based Strain-Gradient Plasticity Theory

Length-scale-dependent stress relief mechanisms in indium at high homologous temperatures

EFFECT OF INTERMEDIATE DEFORMATION ON THE TEXTURING OF <font>Bi</font>-2223/<font>Ag</font> TAPES

Shear Strength of Joints Fabricated by Solders with High Indium Content

A quantitative study of the effect of surface texture on plasticity induced surface roughness and dislocation density of crystalline materials

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Influence of film thickness on the texture, morphology and electro-optical properties of indium tin oxide films

Effects of Annealing Temperature on Texture in Cu-12%Ag Double-Phase Filamentary Composite

Effect of Intermediate Deformation on the Texturing of Bi-2223/Ag Tapes

Plastic strain accommodation and acoustic emission during melting of embedded particles

Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg–4%Li Based Alloys

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Effects of microstructure and texture on the deep drawability of C10200 copper sheets