Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Quantitatively Evaluation on the Cogging Torque of Permanent Magnet Motor Caused by Stator and Rotor Defect

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Study on Cogging Torque of Permanent Magnet In-wheel Motor

Cogging Torque Reduction in External-Rotor Permanent Magnet Torque Motor Based on Different Shape of Magnet

Reducing the Cogging Torque of PM Motor by Stator Teeth Notching

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented Stators

Analysis And Restrain Strategy Of Cogging Torque In Double-Stator Permanent Magnet Brushless Motor

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Torque Analysis of Permanent-Magnet Flux Switching Machines with Rotor Step Skewing

Asymmetrical Magnets in Rotor Structure of a Permanent Magnet Brushless DC Motor for Cogging Torque Minimization