Abstract:We report a type of multimode fiber interferometers (MMI) formed in photonic crystal fiber (PCF). To excite the cladding modes from the fundamental core mode of a PCF, a coupling point is formed. To form the coupling point, we used the method that is blowing compressed gas into the air-holes and discharging at one point, and the air-holes in this point will expand due to gas expansion in the discharge process. By placing two coupling points in series, a very simple all-fiber MMI can be implemented. The detailed fabrication process is that the one end of the PCF is tightly sealed by a short section of single mode fiber (SMF) spliced to the PCF. The other end of the PCF is sealed into a gas chamber and the opened air holes are pressurized. The PCF is then heated locally by the fusion splicer and the holes with higher gas pressure will expand locally where two bubbles formed. We tested the RI responses of fabricated sensors at room temperature by immersing the sensor into solutions with different NaCl concentration. Experimental results show that as refractive-index (RI) increases, the resonance wavelength of the MMI moves toward longer wavelengths. The sensitivity coefficients are estimated by the linear fitting line, which is 46nm/RIU, 154mn/RIU with the interferometer lengths (IL) of 3mm and 6mm. The interferometer with larger IL has higher RI sensitivity. The temperature cross-sensitivity of the sensor is also tested. The temperature sensitivity can be as low as -16.0pm/degrees C.

Photonic Crystal Fiber-Based Modal Interferometer for Refractive Index Sensing

Thin-Core Fiber Sandwiched Photonic Crystal Fiber Modal Interferometer for Temperature and Refractive Index Sensing

Photonic crystal fiber refractive-index sensor based on multimode interferometry

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Investigation of A Cladding-Etched Thin-Core Fiber Modal Interferometer and Its Application for Refractive Index Sensing

Inline fiber interference-based refractive-index sensor

Miniature Single-Mode Fiber Refractive Index Interferometer Sensor Based on High Order Cladding Mode and Core-Offset

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Numerical study of refractive index sensing based on the anti-guide property of a depressed-index core photonic crystal fiber

Refractive index sensing and filtering characteristics of micro-channels photonic crystal fiber

A Three-Beam Path Photonic Crystal Fiber Modal Interferometer and Its Sensing Applications

High-sensitive measurements of refractive-index and magnetic-field based on liquid-infiltrated photonic crystal fiber with an elliptically-shaped core

Refractive Index Sensing Characteristic of A Hybrid-Fabry-Perot Interferometer Based on an In-Fiber Ellipsoidal Cavity

Intensity Modulation Photonic Crystal Fiber Based Refractometer in the Visible Wavelength Range

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

A novel temperature insensitive refractive index sensor based on dual photonic crystal fiber

Cascaded Fiber Non-Adiabatic Taper and Sagnac Loop for Refractive Index Sensing

[Synthesis of poly U by RNA polymerase with octoadenylic acid (hepta adenylyl-(3',5')-adenosine) as a template].