Abstract:A low-power long-term ambulatory ECG monitor was developed for the acquisition, storage and processing of three simultaneous leads DI, aVF and V2 with a beat-to-beat heart rate measurement in real time. It provides long-term continuous ECG recordings until 84 h. The monitor uses a QRS complex detection algorithm based on the continuous wavelet transform with splines, which automatically selects the scale for the analysis of ECG records with different sampling frequencies. It includes a lead-off detection to continuously monitor the electrode connections and a real-time system of visual and acoustic alarms to alert users of abnormal conditions in its operation. The monitor presented is based in an ADS1294 analogue front end with four channels, 24-bit analog-to-digital converters and programmable gain amplifiers, a low-power dual-core ESP32 microcontroller, a microSD memory for data storage in a range of 4 GB to 32 GB and a 1.4 in thin-film transistor liquid crystal display (LCD) variant with a resolution of 128 × 128 pixels. It has programmable sampling rates of 250, 500 and 1000 Hz; a bandwidth of 0 Hz to 50% of the selected sampling rate; a CMRR of -105 dB; an input margin of ±2.4 V; a resolution of 286 nV; and a current consumption of 50 mA for an average battery life of 84 h. The ambulatory ECG monitor was evaluated with the commercial data-acquisition system BIOPAC MP36 and its module for ECG LABEL SS2LB, simultaneously comparing the morphologies of two ECG records and obtaining a correlation of 91.78%. For the QRS detection in real time, the implemented algorithm had an error less than 5%. The developed ambulatory ECG monitor can be used for the analysis of the dynamics of the heart rate variability in long-term ECG records and for the development of one's own databases of ECG recordings of normal subjects and patients with cardiovascular and noncardiovascular diseases.

A low power low niose AFE with continuous time self-calibration filters for ECG monitor and heart beat detection

A 1.2-V 7.2-μw ECG AFE with continuous time self-calibration filters

A 1.2-V 7.2-Mu W Ecg Afe With Continuous Time Self-Calibration Filters

A Low Power Low Noise Front End Amplifier for ECG Monitoring

A 4-Μw Analog Front End Achieving 2.4 NEF for Long-Term ECG Monitoring

A Low Power Low Noise Analog Front End for Portable Healthcare System

A 20 Μw Dual-Channel Analog Front-End in 65nm CMOS for Portable ECG Monitoring System

Design and Analysis of a High-Gain, Low-Noise, and Low-Power Analog Front End for Electrocardiogram Acquisition in 45 nm Technology Using gm/ID Method

A low power analog front-end for portable biopotential acquisition systems

An 8-channel readout front-end for long-term sleep quality monitoring

A 36μw Reconfigurable Analog Front-End IC for Multimodal Vital Signs Monitoring

A 1.7μW/Channel Time-Division-Multiplexing Analog Front-End for Bio-Potential Recording

A 36 Μw 1.1 Mm 2 Reconfigurable Analog Front-End for Cardiovascular and Respiratory Signals Recording

A Design of EES Analog Pre-processing Circuit

A Low-Power Low-Noise Amplifier for EEG/ECG Signal Recording Applications

Reconfigurable Architectures with High-Frequency Noise Suppression for Wearable ECG Devices

A Low Power Qrs Detection Processor With Adaptive Scaling Of Processing Resolution

An Integrated Analog Front-End System on Flexible Substrate for the Acquisition of Bio-Potential Signals

Input-Feature Correlated Asynchronous Analog to Information Converter for ECG Monitoring

Low-Power Long-Term Ambulatory Electrocardiography Monitor of Three Leads with Beat-to-Beat Heart Rate Measurement in Real Time

Design of an Analog Front-End for Ambulatory Biopotential Measurement Systems