Angelica sinensis polysaccharides promotes apoptosis in human breast cancer cells via CREB-regulated caspase-3 activation.

Weijie Zhou,Sheng Wang,Zhuang Hu,Zhenyu Zhou,Caijuan Song

DOI: https://doi.org/10.1016/j.bbrc.2015.09.145

2015-11-20

Abstract:

What problem does this paper attempt to address?

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

Geng Yang,Jian Chen,Fredrik Jonsson,Hannu Tenhunen,Li-Rong Zheng

2009-01-01

Abstract:This paper describes a digital CMOS Application Specific Integrated Circuit (ASIC) solution with the complete data acquisition and transmission for the use in a wearable electrocardiography (ECG) monitoring system. The main particularity of this system is related to the proposed reconfigurable microchip architecture for an intelligent electrode. The chip area is 2.3 mm(2) in a standard 0.18 mu m CMOS technology. The chip is operating at 24 MHz system clock with 3.3 V power supply for I/O cells and 1.8 V for the core circuit respectively. The estimated dynamic power dissipation is only 857 mu W. The post-layout simulation results show that the microchip embedded inside an intelligent electrode features ultra low power consumption and is quite feasible for a hand-held Personal Health Assistant (PHA) which uses a battery as energy source.
A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

Geng Yang,Jian Chen,Fredrik Jönsson,Hannu Tenhunen,Li‐Rong Zheng

DOI: https://doi.org/10.1109/iembs.2009.5335120

2009-01-01

Abstract:In this paper, a reconfigurable, low-power Application Specific Integrated Circuit (ASIC) that extracts and transmits electrocardiograph (ECG) signals is presented. An Intelligent Electrode is introduced which consists of the proposed ASIC and a micro spike array, permitting onsite ECG signal acquisition, processing and transmission. Fabricated in a standard 0.18 microm CMOS process, the ASIC consumes 78 microW with 1.0 V core voltage at 6 MHz operating frequency and only occupies 2.25 mm(2). The tiny silicon size makes it possible and suitable to embed the proposed ASIC into an Intelligent Electrode, and the low power consumption makes it feasible for long term continuous ECG monitoring.
Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

Geng Yang,Jia Mao,Tenhunen, H.,Li-Rong Zheng

DOI: https://doi.org/10.1109/ISABEL.2010.5702786

2010-01-01

Abstract:This paper presents an Intelligent Electrodes and Active Cable based wearable medical system. Within each Intelligent Electrode, an Application Specific Integrated Circuit (ASIC) is integrated which includes a gain-bandwidth selectable analog front-end circuit, an 8-bit SAR ADC and a digital controller. The key of the ASIC is the analog front-end circuit with tunable gain and bandwidth which can be configured for Electrocardiogram (ECG), Electroencephalogram (EEG) or Electromyogram (EMG) measurement. Common mode interference is effectively rejected due to the circuit's high Common Mode Rejection Ratio (CMRR), which is higher than 135 dB up to 100 Hz and better than 110dB up to 1 kHz. Since a dedicated data transmission protocol is implemented on chip, the Intelligent Electrodes can establish a self-organized network and perform synchronous measurements for multiple bio-signals.
A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

Geng Yang,Jian Chen,Fredrik Jonsson,Hannu Tenhunen,Li-Rong Zheng

DOI: https://doi.org/10.1109/date.2012.6176512

2012-01-01

Abstract:This paper presents a fully integrated application specific integrated circuit (ASIC) sensor for the recording of multiple bio-electric signals. It consists of an analog front-end circuit with tunable bandwidth and programmable gain, a 6-input 8-bit successive approximation register analog to digital converter (SAR ADC), and a reconfigurable digital core. The ASIC is fabricated in a 0.18-μm 1P6M CMOS technology, occupies an area of 1.5 x 3.0 mm 2 , and totally consumes a current of 16.7 μA from a 1.2 V supply. Incorporated with the ASIC, an Intelligent Electrode can be dynamically configured for on-site measurement of different bio-signals. A 2-wire data transmission protocol is also integrated on chip. It enables the serial connection over a group of Intelligent Electrodes, thus minimizes the number of connecting cables. A wearable healthcare system is built upon a printed Active Cable and a scalable number of Intelligent Electrodes. The system allows synchronous processing of maximum 14-channel bio-signals. The ASIC performance has been successfully verified in in-vivo bio-electric recording experiments.
A Highly Adaptive Lossless ECG Compression ASIC for Wireless Sensors Based on Hybrid Gomlomb Coding.

Jiahui Luo,Zhijian Chen,Xiaoyan Xiang,Jianyi Meng

DOI: https://doi.org/10.1587/transinf.2017edl8206

2018-01-01

IEICE Transactions on Information and Systems

Abstract:This work presents a low-complexity lossless electrocardiogram (ECG) compression ASIC for wireless sensors. Three linear predictors aiming for different signal characteristics are provided for prediction based on a history table that records of the optimum predictors for recent samples. And unlike traditional methods using a unified encoder, the prediction error is encoded by a hybrid Golomb encoder combining Exp-Golomb and Golomb-Rice and can adaptively configure the encoding scheme according to the predictor selection. The novel adaptive prediction and encoding scheme contributes to a compression rate of 2.77 for the MIT-BIH Arrhythmia database. Implemented in 40nm CMOS process, the design takes a small gate count of 1.82K with 37.6nW power consumption under 0.9V supply voltage.
A Dual-Mode ECG Processor with Difference-Insensitive QRS Detection and Lossless Compression

Jiahui Luo,Zhijian Chen,Xiaoyan Xiang,Jianyi Meng,Haibin Shen

DOI: https://doi.org/10.1587/elex.14.20170524

2017-01-01

IEICE Electronics Express

Abstract:This work presents a low power dual-mode electrocardiogram (ECG) processor with QRS detection and ECG signal lossless compression. An adaptive difference-insensitive filter is proposed to eliminate redundant information in signal for QRS detection, which helps minimize calculation power. It is also adopted as a noise estimator and used to improve the noise tolerance of the detector. Furthermore, in compression mode, linear predictor with a novel adaptive length encoder is applied to the ECG data lossless compression, achieving a compression ratio (CR) of 2.42 with 1.06K gate count. Implemented in 40 nm CMOS technology, the processor has a total core area of 6806 mu m(2), with 36nW power consumption in detection mode and 7.3nW in compression mode under a supply voltage of 0.5V.
An ECG-SoC with 535nW/channel lossless data compression for wearable sensors

C.J.Deepu

DOI: https://doi.org/10.48550/arXiv.1407.5173

2014-07-19

Abstract:This paper presents a low power ECG recording Sys-tem-on-Chip (SoC) with on-chip low complexity lossless ECG compression for data reduction in wireless/ambulatory ECG sensor devices. The proposed algorithm uses a linear slope predictor to estimate the ECG samples, and uses a novel low complexity dynamic coding-packaging scheme to frame the resulting estimation error into fixed-length 16-bit format. The proposed technique achieves an average compression ratio of 2.25x on MIT/BIH ECG database. Implemented in 0.35 {\mu}m process, the compressor uses 0.565 K gates/channel occupying 0.4 mm2 for 4-channel, and consumes 535 nW/channel at 2.4V for ECG sampled at 512 Hz. Small size and ultra-low power consumption makes the proposed technique suitable for wearable ECG sensor application.

Hardware Architecture
In-sensor neural network for high energy efficiency analog-to-information conversion

Sudarsan Sadasivuni,Sumukh Prashant Bhanushali,Imon Banerjee,Arindam Sanyal

DOI: https://doi.org/10.1038/s41598-022-23100-4

2022-10-29

Abstract:This work presents an on-chip analog-to-information conversion technique that utilizes analog hyper-dimensional computing based on reservoir-computing paradigm to process electrocardiograph (ECG) signals locally in-sensor and reduce radio frequency transmission by more than three orders-of-magnitude. Instead of transmitting the naturally sparse ECG signal or extracted features, the on-chip analog-to-information converter analyzes the ECG signal through a nonlinear reservoir kernel followed by an artificial neural network, and transmits the prediction results. The proposed technique is demonstrated for detection of sepsis onset and achieves state-of-the-art accuracy and energy efficiency while reducing sensor power by [Formula: see text] with test-chips prototyped in 65 nm CMOS.
A Lossless Electrocardiogram Compression System Based on Dual-Mode Prediction and Error Modeling.

Menghan Jia,Feiteng Li,Yu Pu,Zhijian Chen

DOI: https://doi.org/10.1109/access.2020.2998608

IF: 3.9

2020-01-01

IEEE Access

Abstract:Long-term electrocardiogram (ECG) monitoring requires high-ratio lossless compression techniques to reduce data transmission energy and data storage capacity. In this paper, we have proposed a high-ratio ECG compression system with low computational complexity. Firstly, as the morphologies of the ECG change over time, we divide the signal of each heartbeat cycle into two regions. To achieve high prediction accuracy, a 1st order linear predictor and a combination of the template predictor and 3rd order linear predictor are applied in the two regions respectively. Secondly, we introduce a context-based error modeling module to the system, which cancels the statistical bias of the prediction algorithm and further improves the prediction accuracy. Thirdly, we modify the Golomb-Rice encoding algorithm to adaptively encode the prediction errors, while preserving a code space for packaging the information that is necessary for prediction. We evaluate the proposed system by using the MIT-BIH Arrhythmia Database (ARRDB). The experimental results show that with memory requirements as low as 444 to 14556 total variables this system achieves a compression ratio (CR) from 2.975 to 3.040, suggesting that it is highly applicable to both the low-power design and the cloud.
An ECG-on-Chip for Wearable Cardiac Monitoring Devices

C. J. Deepu,X. Y. Xu,X. D. Zou,L. B. Yao,Y. Lian,C.J. Deepu,X.Y. Xu,X.D. Zou,L.B. Yao

DOI: https://doi.org/10.48550/arXiv.1409.8020

2014-09-29

Hardware Architecture

Abstract:This paper describes a highly integrated, low power chip solution for ECG signal processing in wearable devices. The chip contains an instrumentation amplifier with programmable gain, a band-pass filter, a 12-bit SAR ADC, a novel QRS detector, 8K on-chip SRAM, and relevant control circuitry and CPU interfaces. The analog front end circuits accurately senses and digitizes the raw ECG signal, which is then filtered to extract the QRS. The sampling frequency used is 256 Hz. ECG samples are buffered locally on an asynchronous FIFO and is read out using a faster clock, as and when it is required by the host CPU via an SPI interface. The chip was designed and implemented in 0.35um standard CMOS process. The analog core operates at 1V while the digital circuits and SRAM operate at 3.3V. The chip total core area is 5.74 mm^2 and consumes 9.6uW. Small size and low power consumption make this design suitable for usage in wearable heart monitoring devices.
Reconfigurable Architecture for Multi-lead ECG Signal Compression with High-frequency Noise Reduction

Mehdi Hasan Chowdhury,Ray C C Cheung

DOI: https://doi.org/10.1038/s41598-019-53460-3

2019-11-21

Abstract:Electrocardiogram (ECG) is a record of the heart's electrical activity over a specified period, and it is the most popular noninvasive diagnostic test to identify several cardiac diseases. It is an integral part of a typical eHealth system, where the ECG signals are often needed to be compressed for long term data recording and remote transmission. Reconfigurable architecture offers high-speed parallel computation unit, particularly the Field Programmable Gate Array (FPGA) along with adaptable software features. Hence, this type of design is suitable for multi-channel signal processing units like ECGs, which usually require precise real-time computation. This paper presents a reconfigurable signal processing unit which is implemented in ZedBoard- a development board for Xilinx Zynq -7000 SoC. The compression algorithm is based on Fast Fourier Transformation. The implemented system can work in real-time and achieve a maximum 90% compression rate without any significant signal distortion (i.e., less than 9% normalized percentage of root-mean-square deviation). This compression rate is 5% higher than the state-of-the-art hardware implementation. Additionally, this algorithm has an inherent capability of high-frequency noise reduction, which makes it unique in this field. The confirmatory analysis is done using six databases from the PhysioNet databank to compare and validate the effectiveness of the proposed system.
Barriers to implementation of the new targeted BCG vaccination in France: a cross sectional study.

L. Rossignol,J. Guthmann,Solen Kernéis,I. Aubin-Auger,A. Lasserre,Pierre Chauvin,Camille Pelat,T. Hanslik,D. Lévy-Bruhl,Thierry Blanchon

DOI: https://doi.org/10.1016/j.vaccine.2011.05.020

IF: 4.169

2011-07-18

Vaccine

Abstract:
A novel ECG compression algorithm using Pulse-Width Modulation integrated quantization for low-power real-time monitoring

Isuri Devindi,Sashini Liyanage,Titus Jayarathna,Janaka Alawatugoda,Roshan Ragel

DOI: https://doi.org/10.1038/s41598-024-68022-5

2024-07-26

Abstract:Cardiac monitoring systems in Internet of Things (IoT) healthcare, reliant on limited battery and computational capacity, need efficient local processing and wireless transmission for comprehensive analysis. Due to the power-intensive wireless transmission in IoT devices, ECG signal compression is essential to minimize data transfer. This paper presents a real-time, low-complexity algorithm for compressing electrocardiogram (ECG) signals. The algorithm uses just nine arithmetic operations per ECG sample point, generating a hybrid Pulse Width Modulation (PWM) signal storable in a compact 4-bit resolution format. Despite its simplicity, it performs comparably to existing methods in terms of Percentage Root-Mean-Square Difference (PRD) and space-saving while significantly reducing complexity and maintaining robustness against signal noise. It achieves an average Bit Compression Ratio (BCR) of 4 and space savings of 90.4% for ECG signals in the MIT-BIH database, with a PRD of 0.33% and a Quality Score (QS) of 12. The reconstructed signal shows no adverse effects on QRS complex detection and heart rate variability, preserving both the signal amplitude and periodicity. This efficient method for transferring ECG data from wearable devices enables real-time cardiac activity monitoring with reduced data storage requirements. Its versatility suggests potential broader applications, extending to compression of various signal types beyond ECG.
A High DR High-Input-Impedance Programmable-Gain ECG Acquisition Interface with Non-inverting Continuous Time Sigma-Delta Modulator

Junhao Liang,Sai-Weng Sin,U. Seng-Pan,Franco Maloberti,Rui Paulo Martins,Hanjun Jiang

DOI: https://doi.org/10.1109/A-SSCC47793.2019.9056891

2019-01-01

Abstract:This paper presents a power-efficient, high dynamic range, high input impedance data acquisition circuit for an implantable electrocardiogram (ECG) detector in 65 nm CMOS, occupying an active area of 0.225 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . To enhance the dynamic range, we utilize a 3 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rd</sup> -order continuous-time sigma-delta modulator with a programmable input gain coefficient and an embedded antialiasing filter. The implementation of the non-inverting integrator allows a high input impedance for the ECG application. The measurement results show that it obtains 84.2dB SNDR in a 150Hz bandwidth with a 1V power supply, consuming 5.4μW at a nominal gain of 0dB. The maximum dynamic range is 99.3dB with the programmable gain activated from 0 to 18dB.
Hardware-Algorithms Co-Design and Implementation of an Analog-to-Information Converter for Biosignals Based on Compressed Sensing

Fabio Pareschi,Pierluigi Albertini,Giovanni Frattini,Mauro Mangia,Riccardo Rovatti,Gianluca Setti

DOI: https://doi.org/10.1109/tbcas.2015.2444276

2016-02-01

IEEE Transactions on Biomedical Circuits and Systems

Abstract:We report the design and implementation of an Analog-to-Information Converter (AIC) based on Compressed Sensing (CS). The system is realized in a CMOS 180 nm technology and targets the acquisition of bio-signals with Nyquist frequency up to 100 kHz. To maximize performance and reduce hardware complexity, we co-design hardware together with acquisition and reconstruction algorithms. The resulting AIC outperforms previously proposed solutions mainly thanks to two key features. First, we adopt a novel method to deal with saturations in the computation of CS measurements. This allows no loss in performance even when 60% of measurements saturate. Second, the system is able to adapt itself to the energy distribution of the input by exploiting the so-called rakeness to maximize the amount of information contained in the measurements. With this approach, the 16 measurement channels integrated into a single device are expected to allow the acquisition and the correct reconstruction of most biomedical signals. As a case study, measurements on real electrocardiograms (ECGs) and electromyograms (EMGs) show signals that these can be reconstructed without any noticeable degradation with a compression rate, respectively, of 8 and 10.

engineering, biomedical, electrical & electronic
An Energy-Efficient Design for ECG Recording and R-Peak Detection Based on Wavelet Transform

Yao Zou,Jun Han,Sizhong Xuan,Shan Huang,Xinqian Weng,Dabin Fang,Xiaoyang Zeng

DOI: https://doi.org/10.1109/TCSII.2014.2368619

2015-01-01

Abstract:Long-term monitoring of electrocardiogram (ECG) requires a portable inspection system that can offer both high energy efficiency and good signal quality. To manage challenges caused by this requirement, this brief presents an ASIC design for both ECG recording and R-peak detection. By supporting data compression and using a dual-ping-pong-memory architecture, this design leads to a large reduction in the whole system energy. To reduce the hardware cost, the techniques of coefficients truncation and resource sharing are adopted. Importantly, parameters optimization and periodic extension are employed to improve quality of the reconstructed signal under high compress ratio (CR). Experimental results based on MIT-BIH database show that the proposed design obtains a high CR of 10.3 with a percentage root-mean-square difference of 0.64% under recording mode, and it achieves an R-peak detection sensitivity of 99.72% as well as a positive prediction of 99.49% with 13.68× data reduction. This design has been fabricated under TSMC 65-nm CMOS technology with area cost of 0.41 mm2. Measurement results indicate that the total system energy consumption for processing one segment of signals can be reduced by 5.7× and 2.3× in recording and detection modes, respectively. Compared to a software implementation on the same chip, this ASIC implementation achieves a 41% and 50% reduction in energy consumption per sample under the two modes, respectively.
Direct Feature Extraction and Diagnosis of ECG Signal in the Compressed Domain

Siye Wang,Yue Wang,Xuechun Bian,Liyang Lu,Wenbo Xu

DOI: https://doi.org/10.1109/JSEN.2021.3081577

IF: 4.3

2021-08-01

IEEE Sensors Journal

Abstract:Recently, Internet of Things (IoT) is becoming an important enabler to achieve smart health care for patients, where electrocardiograph (ECG) analyzing has been widely studied. In order to realize long-term detection of ECG under the limited hardware and network resources especially in the power/computing constrained IoT scenarios, compressive sensing (CS) has attracted tremendous research efforts thanks to its high efficiency in sample collection and information retrieval. Most existing researches focus on reconstructing the original ECG signal from the received compressive samples, which however not only leads to high energy consumption but also suffers from unnecessarily huge computational complexity for full-dimensional recovery. To solve such problems, this paper aims at a task-cognizant sparse signal processing technique for retrieving the necessary information only. Specifically, a correlation-assist compression with adaptive length (CCAL) algorithm is developed, where ECG signal is compressed individually within each pseudo-period to retain the information of each separate heartbeat. In doing so, the compression length is dynamically varying, which is determined by calculating the correlation coefficients between adjacent fragments. In addition, a preprocessing filter is adopted to offset the performance loss resulted from compression. With the compressed heartbeat acquired through CCAL, we extract autoregressive (AR) coefficients directly in the compressed domain. Afterwards, an SVM classifier is used to identify the conditions of the ECG signal. Finally, real data from MIT-BIH arrhythmia database is used for validating the proposed techniques that work efficiently in moderate compression ratios, while achieving desired classification accuracy as the non-compression benchmark at much reduced computational complexity.

Medicine,Computer Science,Engineering
Levitation of heavy particles against gravity in asymptotically downward flows.

J. Angilella,Daniel J. Case,A. Motter

DOI: https://doi.org/10.1063/1.4978386

2017-03-07

Abstract:In the fluid transport of particles, it is generally expected that heavy particles carried by a laminar fluid flow moving downward will also move downward. We establish a theory to show, however, that particles can be dynamically levitated and lifted by interacting vortices in such flows, thereby moving against gravity and the asymptotic direction of the flow, even when they are orders of magnitude denser than the fluid. The particle levitation is rigorously demonstrated for potential flows and supported by simulations for viscous flows. We suggest that this counterintuitive effect has potential implications for the air-transport of water droplets and the lifting of sediments in water.
An Event-Driven Compressive Neuromorphic System for Cardiac Arrhythmia Detection

Jinbo Chen,Fengshi Tian,Jie Yang,Mohamad Sawan

DOI: https://doi.org/10.48550/arXiv.2205.13292

2022-05-26

Abstract:Wearable electrocardiograph (ECG) recording and processing systems have been developed to detect cardiac arrhythmia to help prevent heart attacks. Conventional wearable systems, however, suffer from high energy consumption at both circuit and system levels. To overcome the design challenges, this paper proposes an event-driven compressive ECG recording and neuromorphic processing system for cardiac arrhythmia detection. The proposed system achieves low power consumption and high arrhythmia detection accuracy via system level co-design with spike-based information representation. Event-driven level-crossing ADC (LC-ADC) is exploited in the recording system, which utilizes the sparsity of ECG signal to enable compressive recording and save ADC energy during the silent signal period. Meanwhile, the proposed spiking convolutional neural network (SCNN) based neuromorphic arrhythmia detection method is inherently compatible with the spike-based output of LC-ADC, hence realizing accurate detection and low energy consumption at system level. Simulation results show that the proposed system with 5-bit LC-ADC achieves 88.6\% reduction of sampled data points compared with Nyquist sampling in the MIT-BIH dataset, and 93.59\% arrhythmia detection accuracy with SCNN, demonstrating the compression ability of LC-ADC and the effectiveness of system level co-design with SCNN.

Signal Processing
Real-Time Diagnostic Integrity Meets Efficiency: A Novel Platform-Agnostic Architecture for Physiological Signal Compression

Neel R Vora,Amir Hajighasemi,Cody T. Reynolds,Amirmohammad Radmehr,Mohamed Mohamed,Jillur Rahman Saurav,Abdul Aziz,Jai Prakash Veerla,Mohammad S Nasr,Hayden Lotspeich,Partha Sai Guttikonda,Thuong Pham,Aarti Darji,Parisa Boodaghi Malidarreh,Helen H Shang,Jay Harvey,Kan Ding,Phuc Nguyen,Jacob M Luber

2024-01-05

Abstract:Head-based signals such as EEG, EMG, EOG, and ECG collected by wearable systems will play a pivotal role in clinical diagnosis, monitoring, and treatment of important brain disorder diseases. However, the real-time transmission of the significant corpus physiological signals over extended periods consumes substantial power and time, limiting the viability of battery-dependent physiological monitoring wearables. This paper presents a novel deep-learning framework employing a variational autoencoder (VAE) for physiological signal compression to reduce wearables' computational complexity and energy consumption. Our approach achieves an impressive compression ratio of 1:293 specifically for spectrogram data, surpassing state-of-the-art compression techniques such as JPEG2000, H.264, Direct Cosine Transform (DCT), and Huffman Encoding, which do not excel in handling physiological signals. We validate the efficacy of the compressed algorithms using collected physiological signals from real patients in the Hospital and deploy the solution on commonly used embedded AI chips (i.e., ARM Cortex V8 and Jetson Nano). The proposed framework achieves a 91% seizure detection accuracy using XGBoost, confirming the approach's reliability, practicality, and scalability.

Signal Processing,Distributed, Parallel, and Cluster Computing,Tissues and Organs

Angelica sinensis polysaccharides promotes apoptosis in human breast cancer cells via CREB-regulated caspase-3 activation.

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A 1.0 V 78 &#x03bc;w Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A Highly Adaptive Lossless ECG Compression ASIC for Wireless Sensors Based on Hybrid Gomlomb Coding.

A Dual-Mode ECG Processor with Difference-Insensitive QRS Detection and Lossless Compression

An ECG-SoC with 535nW/channel lossless data compression for wearable sensors

In-sensor neural network for high energy efficiency analog-to-information conversion

A Lossless Electrocardiogram Compression System Based on Dual-Mode Prediction and Error Modeling.

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

Reconfigurable Architecture for Multi-lead ECG Signal Compression with High-frequency Noise Reduction

Barriers to implementation of the new targeted BCG vaccination in France: a cross sectional study.

A novel ECG compression algorithm using Pulse-Width Modulation integrated quantization for low-power real-time monitoring

A High DR High-Input-Impedance Programmable-Gain ECG Acquisition Interface with Non-inverting Continuous Time Sigma-Delta Modulator

Hardware-Algorithms Co-Design and Implementation of an Analog-to-Information Converter for Biosignals Based on Compressed Sensing

An Energy-Efficient Design for ECG Recording and R-Peak Detection Based on Wavelet Transform

Direct Feature Extraction and Diagnosis of ECG Signal in the Compressed Domain

Levitation of heavy particles against gravity in asymptotically downward flows.

An Event-Driven Compressive Neuromorphic System for Cardiac Arrhythmia Detection

Real-Time Diagnostic Integrity Meets Efficiency: A Novel Platform-Agnostic Architecture for Physiological Signal Compression

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications