Abstract:This letter proposes a parasitic elimination bootstrapped switch and a fast settling residual amplifier to be used in multiplying digital-to-analog converter (MDAC) in order to improve the performance of pipelined ADC at high frequency. The parasitic elimination bootstrapped switch improves the sampling spurious free dynamic range (SFDR) by more than 6 dB by shielding the nonlinear parasitic capacitance of the MOS transistor substrate. In addition, at high frequency, the negative zero point introduced by the later stage switch-capacitor circuit (which is easy to be ignored) will seriously deteriorates the settling time of residual amplifier in the former stage. A new zero-pole elimination technique is proposed, which greatly reduces the settling time of residual amplifier by nearly 11% and further improve the performance of MDAC. Simulated in 28 nm CMOS technology, as the input signal is 1.38 GHz, the former stage of the pipelined ADC implements high-speed high-resolution to obtain a SFDR of 75.77 dB and a signal-to-noise-plus-distortion ratio (SNDR) of 68.05 dB at a sampling frequency of 2.2 GS/s.

A 500-1000Ms/s 12-Bit Resolution Level-Shift Bootstrapped Switch

A Novel Low Distortion Switch Used In A/D Converter For Directly Sampling Bipolar Voltage Signals

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

A High-Speed High-Resolution Low-Distortion CMOS Bootstrapped Switch

A New Current Switch Driver with Improved Dynamic Performance Used for 500ms/s, 12-Bit Nyquist Current-Steering DAC.

Design of High Performance Bootstrapped Switch

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

A High Linearity Bootstrapped Switch with Leakage Current Suppressed for GS/s Sampling Rate ADC

A 14-Bit 3-Gs/s DAC Achieving SFDR >63db Up to 1.4ghz with Random Differential-Quad Switching Technique

A high-performance bootstrap switch for low voltage switched-capacitor circuits

A Bootstrapped Sampling Circuit for High-Resolution and High-Speed A/D Converter

High Performance Bootstrap Switch for 14 bit SAR ADC with Redundancy in SMIC 180nm.

A 14-Bit 100-Ms/S Cmos Pipelined Adc Featuring 83.5-Db Sfdr

A Clock-Feedthrough Compensation Technique for Bootstrapped Switch

An 800ms/s, 6.7b ENOB Bootstrap Switching S/H IC for Wideband Direct RF Sub-Sampling Receiver in 45 Nm CMOS

An 8-Bit 100-Ms/s Digital-To-Skew Converter with 200-Ps Range for Time-Interleaved Sampling

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

An Operational Amplifier Assisted Input Buffer And An Improved Bootstrapped Switch For High-Speed And High-Resolution Adcs

A 1V 56.07db SNDR 10mhz Bandwidth Digital Slope ADC Based on Preset Bidirectional-Shifting Technique.

A High-Speed High-Resolution Sample-and-Hold Circuit

Design of a 10-BIT 100MSPS Sar ADC