Abstract:This letter proposes a parasitic elimination bootstrapped switch and a fast settling residual amplifier to be used in multiplying digital-to-analog converter (MDAC) in order to improve the performance of pipelined ADC at high frequency. The parasitic elimination bootstrapped switch improves the sampling spurious free dynamic range (SFDR) by more than 6 dB by shielding the nonlinear parasitic capacitance of the MOS transistor substrate. In addition, at high frequency, the negative zero point introduced by the later stage switch-capacitor circuit (which is easy to be ignored) will seriously deteriorates the settling time of residual amplifier in the former stage. A new zero-pole elimination technique is proposed, which greatly reduces the settling time of residual amplifier by nearly 11% and further improve the performance of MDAC. Simulated in 28 nm CMOS technology, as the input signal is 1.38 GHz, the former stage of the pipelined ADC implements high-speed high-resolution to obtain a SFDR of 75.77 dB and a signal-to-noise-plus-distortion ratio (SNDR) of 68.05 dB at a sampling frequency of 2.2 GS/s.

A High-Speed High-Resolution Sample-and-Hold Circuit

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

Design of a High-Speed Sample-and-hold Circuit Using a Substrate-Biasing-effect Attenuated T Switch

A sample and hold circuit for high speed ADCs

Design of a Sample-and-Hold Circuit for High Speed CMOS Image Sensor

A Novel Low Distortion Switch Used In A/D Converter For Directly Sampling Bipolar Voltage Signals

A High Performance CMOS Sample and Hold Circuit

A CMOS high performance 50MS/s sample/hold circuit

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

A High-Speed High-Resolution Low-Distortion CMOS Bootstrapped Switch

An Undersampling High-Resolution Low-Power Sample-and-Hold Circuit

A High-Performance Sample-and-Hold Circuit with Sampling Bandwidth Compensation

A Sample/Hold Circuit for Low-Power High-Resolution A/D Converters

A 1.2V Sample-and-Hold Circuit for 14-Bit 250MS/s Pipeline ADC in 65nm CMOS

A CMOS High-Speed Sample-and-Hold Amplifier

A Bootstrapped Sampling Circuit for High-Resolution and High-Speed A/D Converter

A 12-Bit 200-Ms/s Sample-and-hold Amplifier with a Hybrid Miller-Feedforward Compensation Technique

An S/H circuit with parasitics optimized for IF-sampling

A High-Speed Analog Front-End Circuit Used in A 12bit 1gsps Pipeline Adc

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter