Abstract:This letter proposes a parasitic elimination bootstrapped switch and a fast settling residual amplifier to be used in multiplying digital-to-analog converter (MDAC) in order to improve the performance of pipelined ADC at high frequency. The parasitic elimination bootstrapped switch improves the sampling spurious free dynamic range (SFDR) by more than 6 dB by shielding the nonlinear parasitic capacitance of the MOS transistor substrate. In addition, at high frequency, the negative zero point introduced by the later stage switch-capacitor circuit (which is easy to be ignored) will seriously deteriorates the settling time of residual amplifier in the former stage. A new zero-pole elimination technique is proposed, which greatly reduces the settling time of residual amplifier by nearly 11% and further improve the performance of MDAC. Simulated in 28 nm CMOS technology, as the input signal is 1.38 GHz, the former stage of the pipelined ADC implements high-speed high-resolution to obtain a SFDR of 75.77 dB and a signal-to-noise-plus-distortion ratio (SNDR) of 68.05 dB at a sampling frequency of 2.2 GS/s.

A High Performance CMOS Sample and Hold Circuit

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

Design of a High-Speed Sample-and-hold Circuit Using a Substrate-Biasing-effect Attenuated T Switch

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

Design of a Sample-and-Hold Circuit for High Speed CMOS Image Sensor

A CMOS high performance 50MS/s sample/hold circuit

A sample and hold circuit for high speed ADCs

A Novel Low Distortion Switch Used In A/D Converter For Directly Sampling Bipolar Voltage Signals

A High-Speed High-Resolution Sample-and-Hold Circuit

An Undersampling High-Resolution Low-Power Sample-and-Hold Circuit

Design of a High-Speed Flip-Around Sample-and-Hold Circuit

A CMOS High-Speed Sample-and-Hold Amplifier

A High-Speed High-Resolution Low-Distortion CMOS Bootstrapped Switch

A High-Performance Sample-and-Hold Circuit with Sampling Bandwidth Compensation

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

A 1.2V Sample-and-Hold Circuit for 14-Bit 250MS/s Pipeline ADC in 65nm CMOS

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A Sample/Hold Circuit for Low-Power High-Resolution A/D Converters

A CMOS High-Speed Multistage Preamplifier for Comparator Design

A 12-Bit 200-Ms/s Sample-and-hold Amplifier with a Hybrid Miller-Feedforward Compensation Technique

Sample and Hold Front-end Circuit for 14-Bit 210 MS/s Charge-domain ADC