Abstract:This paper presents an efficient 8-MS/s 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) with the proposed symmetric complementary switching (SCS) and split passive reference segmentation (SPRS). Conventionally, improving the SAR ADC speed compromises the signal-to-noise-and-distortion ratio (SNDR) and energy efficiency due to the high precision requirement and the sequential bit-cycling. In this design, the proposed SCS scheme reduces the parasitic capacitance in the sampling path and the settling error of the capacitive digital-to-analog converter (CDAC) with low SNDR and hardware penalties. In addition, to reduce reference ripples, active reference buffers generally consume high power while the passive methods may degrade the SNDR or occupy large areas. To efficiently reduce reference settling errors, an area-efficient SPRS is developed, which suppresses the reference settling error through the split reference segmentation. The prototype chip is fabricated in a 180-nm CMOS process and occupies an area of 0.57 mm2. Measurements show the ADC achieves a peak SNDR of 89.2 dB at 8 MS/s with a 9.5-mW power consumption. The Schreier-figure-of-merit (FoM) is 175.4 dB.

High Performance Bootstrap Switch for 14 bit SAR ADC with Redundancy in SMIC 180nm.

Design of an 8-Channel 12bits 1MSPS SAR ADC

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

Design of High Performance Bootstrapped Switch

Design of a 10-BIT 100MSPS Sar ADC

A High Linearity Bootstrapped Switch with Leakage Current Suppressed for GS/s Sampling Rate ADC

An 800ms/s, 6.7b ENOB Bootstrap Switching S/H IC for Wideband Direct RF Sub-Sampling Receiver in 45 Nm CMOS

A 12-bit 1.1GS/s Pipelined-SAR ADC With Adaptive Inter-Stage Redundancy in 28 nm CMOS

A 0.6-V 10-Bit 200-Ks/s SAR ADC with Higher Side-Reset-and-Set Switching Scheme and Hybrid CAP-MOS DAC

A 500-1000Ms/s 12-Bit Resolution Level-Shift Bootstrapped Switch

A high-performance bootstrap switch for low voltage switched-capacitor circuits

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

200Ms/s 10bit Sar Adc with 1.5bit Redundant Acceleration

A High-Speed High-Resolution Low-Distortion CMOS Bootstrapped Switch

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

A 5-bit High-Linearity, Binary-Recombination-Redundancy Sub-SAR ADC in 300MS/s, 14-bit Pipelined-SAR ADC

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

Design of High-Speed SAR ADC based on 40nm CMOS Process

A Single-Channel 10-Bit 160 MS/s SAR ADC in 65 Nm CMOS

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 12-Bit 100ms/s SAR ADC with Equivalent Split-Capacitor and LSB-Averaging in 14-Nm CMOS FinFET