Abstract:This paper presents an efficient 8-MS/s 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) with the proposed symmetric complementary switching (SCS) and split passive reference segmentation (SPRS). Conventionally, improving the SAR ADC speed compromises the signal-to-noise-and-distortion ratio (SNDR) and energy efficiency due to the high precision requirement and the sequential bit-cycling. In this design, the proposed SCS scheme reduces the parasitic capacitance in the sampling path and the settling error of the capacitive digital-to-analog converter (CDAC) with low SNDR and hardware penalties. In addition, to reduce reference ripples, active reference buffers generally consume high power while the passive methods may degrade the SNDR or occupy large areas. To efficiently reduce reference settling errors, an area-efficient SPRS is developed, which suppresses the reference settling error through the split reference segmentation. The prototype chip is fabricated in a 180-nm CMOS process and occupies an area of 0.57 mm2. Measurements show the ADC achieves a peak SNDR of 89.2 dB at 8 MS/s with a 9.5-mW power consumption. The Schreier-figure-of-merit (FoM) is 175.4 dB.

An 800ms/s, 6.7b ENOB Bootstrap Switching S/H IC for Wideband Direct RF Sub-Sampling Receiver in 45 Nm CMOS

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

A 14-Bit 500-Ms/S Sha-Less Pipelined Adc In 65nm Cmos Technology For Wireless Receiver

A 40-Mw 7-Bit 2.2-Gs/s Time-Interleaved Subranging ADC for Low-Power Gigabit Wireless Communications in 65-Nm CMOS

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

A 10 MS/s 10 bit SAR A/D Converter in RF System

High Performance Bootstrap Switch for 14 bit SAR ADC with Redundancy in SMIC 180nm.

An S/H circuit with parasitics optimized for IF-sampling

A High-Speed High-Resolution Low-Distortion CMOS Bootstrapped Switch

A Successive Approximation ADC Applied in AGC Loop of RF Receiver

A 500-1000Ms/s 12-Bit Resolution Level-Shift Bootstrapped Switch

A High-Speed High-Resolution Sample-and-Hold Circuit

A High Speed Sampler for Sub-Sampling IR-UWB Receiver

A Bootstrapped Sampling Circuit for High-Resolution and High-Speed A/D Converter

A 6-B 600 Ms/S Sar Adc with A New Switching Procedure of 2-B/stage and Selflocking Comparators

Design of High Performance Bootstrapped Switch

A High Sfdr 6-Bit 20-Ms/S Sar Adc Based On Time-Domain Comparator

A 0.22 pJ/step subsampling ADC with fast input-tracking sampling and simplified opamp sharing

A 9.8 Gbps, 6.5 Mw Forwarded-Clock Receiver with Phase Interpolator and Equalized Current Sampler in 65 Nm Cmos

A High Linearity Bootstrapped Switch with Leakage Current Suppressed for GS/s Sampling Rate ADC

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process