Abstract:A close-packed coil with a 72 mm aperture is developed using the formvar-insulated NbTi wire made from the WST company. The micrometer-level inter-turn spaces are filled with CTD-101 K utilizing a vacuum pressure impregnation method with a controllable flow speed of the epoxy resin. The cryogenic excitation results indicate that the coil inter-turn spaces are well filled, so that it can generate a 7.35 T central magnetic field at an operation current of 176 A with no coil quench. The maximum loadline of the coil is proved to be 98.96%. The maximum hoop-stress is approximately 64.1 MPa at the center of the inner most coil layer. The VPI method is applicable to the close-packed coils (tcoil <= 28 mm) wound from the formvar-insulated NbTi wire.Differ from the fiberglass-insulated Nb3Sn wire, the formvar insulated NbTi provide a relative smooth wire surface, which does not absorb the epoxy resin. This significantly increases the difficulties of vacuum pressure impregnation (VPI) for a thick close-packed NbTi coil. With the purpose of understanding the applicable of current VPI procedure on formvar insulated NbTi coils, a close-packed solenoidal magnet wound from the for-mvar insulated NbTi is wound, vacuum pressure impregnated and cryogenic measured at the Institute of Plasma Physics (ASIPP), Chinese Academy of Sciences (CAS). The design aperture of the magnet is 72 mm, with coil thickness of 28.75 mm and coil height of 180.5 mm, the magnet is expected to generate a 7.04 T central magnetic field with an operation current of 170 A at 4.2 K. The excitation results show that the central magnetic field of the NbTi coil impregnated with current VPI procedure is able to reach 7.35 T with no quench under an operation current of 176 A. The loadline is close to 98.96% of the NbTi wire.

Construction and Test of 7-T/68-mm Cold-Bore Multiwidth No-Insulation GdBCO Magnet

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

Development of YBCO Insert for a 25 T All Superconducting Magnet

Development of a 7 T NbTi solenoidal magnet with 72 mm aperture

Solenoidal Coils Made from Monofilamentary and Multifilamentary MgB2 strands

Fabrication of Racetrack-Type Double-Pancake Coils Using 2g Tapes and Online Mechanical Shock Test

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

Tests on a 6 T Conduction-Cooled Superconducting Magnet

Design and Test of a 90-T Nondestructive Magnet at the Wuhan National High Magnetic Field Center

Development of a 12 T Conduction-Cooled Split-Pair Magnet with Crossing Warm Bore

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

23 Tesla high temperature superconducting pocket magnet

Studies of the Performance of MMD- and MW-type Permanent Multipole Magnets

Fabrication and Test of an 8-T Superconducting Split Magnet System with Large Crossing Warm Bore

A Persistent-Mode 0.5t Solid-Nitrogen-Cooled Mgb2 Magnet for Mri

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Fabrication of MgB2 Coil with the Center Field of 5.71 Tesla Using 520‐m Inner Magnesium Diffusion Wire

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Design and Analysis of a No-Insulation Pancake Coil-System for Next-Generation Meter-Class Bore High-Field MRIs