Abstract:Effective thermal management is crucial for light-emitting diodes (LED). Thermoelectric cooler (TEC) and microchannel heat sink (MHS) have been demonstrated to be effective for thermal management of LED. However, neither the combination of these two methods, nor the dominant factors which could be effectively adjusted to control the LED temperature, have been reported. In this study, a cooling device integrating TEC and water-cooled microchannel heat sink (WMHS) is proposed to improve the thermal management of high-power LED headlights. The start-up performance of the proposed device, LED + TEC + WMHS, was evaluated and compared with three different systems, namely LED + WMHS, LED + AHS (air-cooled heat sink), and LED + TEC + AHS. Experimental results have demonstrated the best performance of the LED + TEC + WMHS device. Orthogonal experiments based on the Taguchi method were conducted to reveal dominant factors among four variables, including TEC current, water inlet temperature, water flow velocity, and ambient temperature. The results show that effects of all the factors were significant while the TEC current has most important influence on the performance. The variation of the thermal management performance with the levels of the factors were investigated. The LED temperature was only 60.0 degrees C even at severe working conditions (T-a = 80 degrees C, T-i = 55 degrees C) and moderate cooling input (I-TEC = 2 A, u = 0.49 m/s), indicating great thermal management performance of the proposed method. Choosing a cooling system and adjusting the factor levels for different applications were recommended.

Thermal Model Design and Analysis of High-Power LED Headlamp Cooling Device Based on the Thermoelectric Effect

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Thermal Design Based on Thermosyphon Heat Sink of High-Power LED Street Light

Thermal Analysis and Design of High-Power LED Street Light

Thermal management of high-power LED based on thermoelectric cooler and nanofluid-cooled microchannel heat sink

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Analysis of thermal spreading resistance in high power LED package and its design optimization

A Model to Evaluate the Device-Level Performance of Thermoelectric Cooler with Thomson Effect Considered

Latest Advancement of Thermal Management for High Power LED

Analysis and Design of one Cooling System of LED Headlamp

Thermal performance testing for high power light-emitting diode based on voltage-current characteristics with pulse injection

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

A Liquid Metal Cooling System for the Thermal Management of High Power LEDs

The Study on High-effect and Mechanism of Heat Dissipation of Tunnel LED

Thermal Simulation for High Power LED Systems with Remote Phosphor Layer

Orthogonal study and analysis of variance on a thermal management system for high-power LED package.

Cooling of High Power LEDs Through Ventilating Ambient Air to Front Surface of Chip

Thermal Management Analysis of LED Luminaire for Road Lighting

Enhancement of thermoelectric cooling by hot-end electroluminescence

Thermal Design of GaN-based High-power LED Module

Thermal Properties of Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation