Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Low Frequency-Noise Random Fiber Laser with Bidirectional Sbs and Rayleigh Feedback

Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Narrow linewidth low frequency noise Er-doped fiber ring laser based on femtosecond laser induced random feedback

Stabilized Narrow-Linewidth Brillouin Random Fiber Laser With a Double-Coupler Fiber Ring Resonator

Ultrafast Raman fiber Laser with Random Distributed Feedback

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Low Frequency-Noise Ring Random Fiber Laser With a Dual-Cavity FBG Fabry-Perot Filter

Ultra-narrow linewidth and a low-noise cascading Brillouin random fiber laser with a dual pump

Frequency noise of distributed Bragg reflector single-frequency fiber laser

Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920 nm

Random Laser with Erbium-Doped Fiber and Fs-Laser Introduced Random Fiber Grating

Sub-kHz-linewidth broadband-swept fiber laser based on Rayleigh scattering-enabled Brillouin random lasing oscillation with dynamic tunning Brillouin gain spectrum

Single-longitudinal-mode narrow linewidth broadband tunable Brillouin random laser including dispersion compensation fibers

Enhancing frequency stability and mode control in a Brillouin random fiber laser with a strongly scattering disordered grating

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Low Noise Single Frequency DFB Fiber Laser

Single-Frequency Ring Fiber Laser with Random Distributed Feedback Provided by Artificial Rayleigh Scattering

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

Towards optimal conversion efficiency of Brillouin random fiber lasers in a half-open linear cavity

Dynamic detection of acoustic wave generated by polarization maintaining Brillouin random fiber laser