Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Low Frequency-Noise Ring Random Fiber Laser With a Dual-Cavity FBG Fabry-Perot Filter

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Low-noise High-Order Raman Fiber Laser Pumped by Random Lasing.

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

Narrow linewidth low frequency noise Er-doped fiber ring laser based on femtosecond laser induced random feedback

Low-noise high-order Raman fiber laser with common-cavity pump of random lasing

Enhancing frequency stability and mode control in a Brillouin random fiber laser with a strongly scattering disordered grating

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

Single-frequency random distributed Bragg reflector fiber laser

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Multi-wavelength random fiber laser based on a tilted parallel inscribed apodized fiber Bragg grating array

High Order Cascaded Raman Random Fiber Laser with High Spectral Purity

Double-path ring cavity erbium-doped random fibre laser based on Rayleigh scattering generated by single mode fibre

Stable and Ultra-narrow Linewidth Random Fiber Laser Based on Random Fiber Bragg Gratings

Single-frequency Yb-doped Fiber Laser with Distributed Feedback Based on a Random FBG

Random fiber laser formed by mixing dispersion compensated fiber and single mode fiber.

Single-Frequency Ring Fiber Laser with Random Distributed Feedback Provided by Artificial Rayleigh Scattering

Temperature-controlled mode selection of Er-doped random fiber laser with disordered Bragg gratings

Wavelength injection locking actively Q-switched random fiber laser based on random phase-shifted fiber Bragg grating and electro-optic modulator

Ultrafast Raman fiber Laser with Random Distributed Feedback