Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Relevance override: on the reduced impact of "cues" under high-motivation conditions of persuasion studies.

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Single-longitudinal-mode narrow linewidth broadband tunable Brillouin random laser including dispersion compensation fibers

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

Single-longitudinal-mode Brillouin random fiber laser with high linewidth–compression ratio and laser efficiency based on distributed intrinsic feedback mechanism

Enhancing frequency stability and mode control in a Brillouin random fiber laser with a strongly scattering disordered grating

High-order-mode Brillouin Random Fiber Laser Based on Distributed Rayleigh Scattering in All-Few Mode Fiber Half-Open Cavity

Ultrafast Raman fiber Laser with Random Distributed Feedback

Stabilized Narrow-Linewidth Brillouin Random Fiber Laser With a Double-Coupler Fiber Ring Resonator

Biosynthesis of lysosomal endopeptidases

High Efficiency Frequency Doubling with a Passive Enhancement Cavity

Quasi-kilowatt random fiber laser

Self-injection locked low-noise Brillouin random fiber laser via dynamic fiber grating for QAM coherent communication

Multi-wavelength random fiber laser based on a tilted parallel inscribed apodized fiber Bragg grating array

Single-frequency random distributed Bragg reflector fiber laser

Gene expression profile of the Gs-coupled prostacyclin receptor in human vascular smooth muscle cells.

Distributed Feedback Fiber Laser Employing Brillouin Gain