Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Frequency noise of distributed Bragg reflector single-frequency fiber laser

Single-frequency random distributed Bragg reflector fiber laser

Single-frequency Yb-doped Fiber Laser with Distributed Feedback Based on a Random FBG

Frequency Noise Characteristics of A Narrow-Linewidth Dfb Semiconductor Laser in Resonator Fiber Optic Gyro

Fabrication of Integrated Single Frequency DBR Fiber Laser Directly on YDF by Femtosecond Laser

Single-frequency DBR Nd-doped fiber laser at 1120 nm with a narrow linewidth and low threshold

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Spectrum Extreme Purification and Modulation of DBR Fiber Laser With Weak Distributed Feedback

Low Noise Single-Frequency Single-Polarization Ytterbium-Doped Phosphate Fiber Laser at 1083 Nm

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

1.5 μm polarization-maintaining dual-wavelength single-frequency distributed Bragg reflection fiber laser with 28 GHz stable frequency difference

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

Low Noise Single Frequency DFB Fiber Laser

Experimental Studies of DBR Fibre Lasers

Efficient DBR Single-Frequency Er3+/Yb3+ Co-Doped Phosphate Fiber Laser Operating at 1500 Nm

Stable Tunable Narrow-Linewidth Fiber Laser Based on Random Distributed Feedback

Low Frequency-Noise Ring Random Fiber Laser With a Dual-Cavity FBG Fabry-Perot Filter