Abstract:All-solid-state batteries (ASSBs) are expected to address the battery safety issues fundamentally by replacing the flammable electrolyte with solid electrolytes (SEs). However, recent studies report that the thermal runaway happened for NASICON-type SEs when they contact with Li metal at high temperature and indicate that the ASSBs may not be totally safe. Here, the thermal stability of a NASICON-type Li1.4Al0.4Ti1.6(PO4)3 (LATP) SE pellet against metallic lithium is quantified in a quasi-practical situation. Accelerated thermal runaway of the LATP pellet compared to LATP powder is observed when they contact with lithium. Combining electrochemical impedance spectroscopy and X-ray computed tomography analysis, lithium penetration into the pellet at high temperature has been observed. The penetrated lithium without surface impurities and the high reactivity of LATP at defect sites (atomic structural defects, cracks, voids, etc.) lead to higher interfacial reactivity and earlier thermal runaway. By adding LiPO2F2 to modify those defect sites of the LATP pellet and impede the lithium/SE interfacial reactions, the thermal runaway can be remarkably delayed. This work elucidates the thermal runaway behaviors of Li/LATP pellets in a quasi-practical environment, provides new information about safety issues of ASSBs, and inspires future investigations into this urgent-needed area.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01246?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01246</a>.Fitting results of the EIS spectra for Li/LATP/Li cells; successive images of an LATP pellet in contact with metallic lithium in a hot plate; and SEM images of the cross-section of LATP and pellets (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01246/suppl_file/am1c01246_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancing the Thermal Stability of NASICON Solid Electrolyte Pellets against Metallic Lithium by Defect Modification

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

Failure Mechanism and Interface Engineering for NASICON Structure All-solid-state Lithium Metal Batteries.

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Effects of Li1.3al0.3ti1.7(Po4)3 Solid-State Electrolytes on the Safety of Hybrid Solid-Liquid Batteries

Stabilizing the Interface of NASICON Solid Electrolyte Against Li Metal with Atomic Layer Deposition.

Stabilization the Interface of NASICON-type Solid Electrolyte and Li metal by Al Interlayer

Recent Advances of LATP and Their NASICON Structure As a Solid‐State Electrolyte for Lithium‐Ion Batteries

Improving the Safety of an Ah-level Energy-Dense Li-ion Cell by LATP Solid Electrolyte Modified Separators

Revealing the Quasi-solid-state Electrolyte Role on the Thermal Runaway Behavior of Lithium Metal Battery

Progress and Perspective of Li 1 + X Al X Ti 2 ‐x ( PO 4 ) 3 Ceramic Electrolyte in Lithium Batteries

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

Insight into the Extreme Side Reaction between LiNi<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>O<sub>2</sub> and Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> during Cosintering for All-Solid-State Batteries

Atomic-Scale Cryo-TEM Studies of the Thermal Runaway Mechanism of Li1.3Al0.3Ti1.7P3O12 Solid Electrolyte

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries

Improving the stability of NASICON-type electrolyte with Li metal anode by interfacial modification

Stabilizing Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub>|Li Metal Anode Interface in Solid-State Batteries by Kevlar Aramid Nanofiber-Based Protective Coating

Effects of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid-State Electrolytes on the Safety Hybrid Solid-Liquid Batteries

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Critical Factors Contributing to the Thermal Runaway of Thiophosphate Solid Electrolytes for All‐Solid‐State Batteries