Abstract:All-solid-state electrolytes provide a guarantee for the safe running of Li metal batteries (LMBs) with high energy density. Nevertheless, the low ionic conductivity and huge interfacial impedance between lithium anodes and electrolytes are the critical issues baffling their rapid development and practical application, particularly limiting their operation at room temperature. The introduction of ionic liquids (IL) is expected to solve the above problems. However, the effect of the IL-involved solid-state electrolytes on lithium dendrites suppression has not been clearly revealed and still necessitates in-depth evaluation. In this article, we report an in situ LiF-rich solidelectrolyte interphase (SEI) on the lithium anode triggered by reductive decomposition of IL and Li1.5Al0.5Ge1.5(PO4)3-involved electrolyte. For the first time, the mechanism of SEI formed on Li metal based on IL-based solid-state electrolyte was unveiled. A combination of experimental and computational investigation manifests that the presence of Li1.5Al0.5Ge1.5(PO4)3 promotes the release of fluorine anion from IL, and a SEI layer with high content of LiF can be generated in situ through the reductive decomposition of wandering fluorine anion. Thanks to the high mechanical modulus from Li1.5Al0.5Ge1.5(PO4)3, the symmetric Li|Li batteries equipped with synthesized solid-state composite electrolyte (SSCE) exhibit extremely stable Li plating/stripping behavior for more than 2700 h with a small polarization voltage of 50 mV at 0.1 mA cm-2. Moreover, the assembled solidstate Li|LiFePO4 batteries based on SSCE could operate steadily for 196 cycles at ambient temperature, with 90.7% capacity retention. These results provide a promising insight into the design of SSCE and realization of room temperature solid-state LMBs with high performance.

Revealing the Quasi-solid-state Electrolyte Role on the Thermal Runaway Behavior of Lithium Metal Battery

Systematic safety evaluation of quasi-solid-state lithium batteries: a case study

Thermoresponsive Electrolytes for Safe Lithium-Metal Batteries

Thermal Stability of Sulfide Solid Electrolyte with Lithium Metal

Enabling the thermal stability of solid electrolyte interphase in Li‐ion battery

Safer solid‐state lithium metal batteries: Mechanisms and strategies

In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries

In Situ Fabricated Non‐Flammable Quasi‐Solid Electrolytes for Li‐Metal Batteries

Design Strategies of Safe Electrolytes for Preventing Thermal Runaway in Lithium Ion Batteries

High-Safety All-Solid-State Lithium-Metal Battery with High-Ionic-Conductivity Thermoresponsive Solid Polymer Electrolyte

Thermal Warning and Shut‐down of Lithium Metal Batteries Based on Thermoresponsive Electrolytes

Oxygen-induced thermal runaway mechanisms of Ah-level solid-state lithium metal pouch cells

Effects of Li1.3al0.3ti1.7(Po4)3 Solid-State Electrolytes on the Safety of Hybrid Solid-Liquid Batteries

In Situ Detecting Thermal Stability of Solid Electrolyte Interphase (SEI)

Thermal runaway routes of large-format lithium-sulfur pouch cell batteries

Phonon Engineering in Solid Polymer Electrolyte Towards High Safety for Solid‐State Lithium Batteries

Constructing thermo-responsive polysiloxane shields via lithium initiation to inhibit thermal runaway of lithium metal batteries

The Regulation of Solid Electrolyte Interphase on Composite Lithium Anodes in Solid‐State Batteries

Safety Perceptions of Solid-State Lithium Metal Batteries

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries