Abstract:The cryogenic mechanical properties and deformation behaviour of additively manufactured (AM) medium/high-entropy alloys (MEA/HEA) and their composites are seldom studied. This work fills this gap by systematically studying the mechanical properties, deformation behaviour and strengthening mechanism of the additively manufactured CoCrFeMnNi high-entropy alloy (HEA) and 2 wt% TiC/CoCrFeMnNi composite (HEC) at room (293 K) and cryogenic (93 K) temperatures. The TiC nanoparticles promote the densification behaviour, and they are uniformly distributed around and in interior of the cellular substructures of the HEC sample. The tensile tests reveal that the strength and ductility can be simultaneously increased in both HEA and HEC samples when the temperature decreases from 293 K to 93 K. The TiC nanoparticles significantly promote a remarkable combination of strength and ductility in the HEC at both 293 K and 93 K, and the cryogenic tensile strength of HEC (1506 ± 6.6 MPa) is the highest value reported for AM-fabricated MEA/HEAs. For the HEA sample, the significant increase in strength and ductility is attributed to an additional hardening contribution induced by multiple twin systems at 93 K, which results in a steady and even increased strain hardening rate. When the temperature decreases from 293 K to 93 K, a remarkable yield strength increment (344.4 MP) is found in the HEC sample, which is significantly higher than that of HEA (229.0 MPa). The difference in the increase in yield strength between HEA and HEC sample is ascribed to the difference in dislocation strengthening and Orowan strengthening, which are related to the temperature-dependent thermal expansion coefficient and elastic modulus, respectively. However, the HEC sample has a smaller ductility increase (10.3%) than the HEA sample (26.4%), since no additional hardening mechanism is generated during the cryogenic deformation in the HEC sample. This research provides a new route to design materials with a good combination of strength and ductility for cryogenic applications.

Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Welding Dissimilar Alloys of CoCrFeMnNi High-Entropy Alloy and 304 Stainless Steel Using Gas Tungsten Arc Welding

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion

Microstructure and mechanical property of gas tungsten arc and friction stir welds of L12 precipitate FCC high-entropy alloy

Microstructures and mechanical behavior of non-equiatomic Co29Cr29Fe29Ni13-V high-entropy alloys at room and cryogenic temperatures

GPa grade cryogenic strength yet ductile high-entropy alloys prepared by powder metallurgy

Synergistic Effects of Monel 400 Filler Wire in Gas Metal Arc Welding of CoCrFeMnNi High Entropy Alloy

Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures

Temperature Effect on Deformation Mechanisms and Mechanical Properties of Welded High-Mn Steels for Cryogenic Applications

Effect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy Alloys

Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy

Dissimilar Laser Welding of CrMnFeCoNi High Entropy Alloy and 316LN Stainless Steel for Cryogenic Application

Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel

Cryogenic Strengthening of Fe27Co24Ni23Cr26 High-Entropy Alloys Via Hierarchical Nanotwin-Driven Mechanism

Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

Excellent mechanical properties of CoNiCr-based MP159 multicomponent alloys at ambient and cryogenic temperatures