Abstract:In the present work, three kinds of precipitates with different morphologies, structures, sizes, and volume fractions were obtained via energetically-tuning the microstructures of the nano-precipitated CoCrFeNiTi0.2 high-entropy alloy (HEA). Subjected to the heavy cold rolling immediately after homogeneous precipitation, L12 structured spherical nano-particles with an average size of 16.5 nm rapidly grow into 200 nm-sized spherical ones due to Ostwald ripening. On the other hand, superfluous mechanical energy storage energetically facilitates the phase transformation from spherical L12 to rod-shaped D024 structures for initially formed nano-precipitates. Besides, some other newly formed nano-precipitates with an average size of 6.5 nm are available, originating from heavily plastically deformed-induced nucleated sites. Multi-scale precipitates interact with dislocations in different ways. The strengthening provided by dislocations cutting through smaller nano-particles and bypassing grown ones account for 57.7% and 42.3% of precipitation strengthening, respectively, while rod-shaped precipitates can act as equivalent interfaces to hinder dislocation movement. Their synergistic effect has achieved remarkable strengthening and toughening. Specially, dislocation slips dominate at 298 K, while stacking faults (SFs) assist plastic deformation at 77 K. Compared with 298 K, the yield strength (YS) and ultimate tensile strength (UTS) of the current HEAs at 77 K are increased by 38.9% and 38.2% to 1 GPa and 1.5 GPa, respectively, and the tensile strain is slightly increased to 35% instead of loss, realizing excellent strength and plasticity combination. Theoretically established strengthening models agree well room-temperature and cryogenic yield strengths experimentally. Moreover, the tensile elongation is effectively predicted by the Whitehouse-Clyne model. This strengthening strategy of energetically-tuning polymorphous precipitates provides the basic guidance to develop high-performance nano-precipitated alloys. The current strengthening and plasticity models can be employed to well predict the mechanical properties of such kinds of alloys at cryogenic temperatures.

GPa grade cryogenic strength yet ductile high-entropy alloys prepared by powder metallurgy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion

Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys

Toughening FeMn-based High-Entropy Alloys Via Retarding Phase Transformation

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Cryogenic mechanical behavior of a TRIP-assisted dual-phase high-entropy alloy

Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy

Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures

High-entropy Al 0.3 CoCrFeNi Alloy Fibers with High Tensile Strength and Ductility at Ambient and Cryogenic Temperatures

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy

Microstructures and mechanical behavior of non-equiatomic Co29Cr29Fe29Ni13-V high-entropy alloys at room and cryogenic temperatures

Heavy Carbon Alloyed FCC-structured High Entropy Alloy with Excellent Combination of Strength and Ductility

Enhancing cryogenic yield strength and ductility of the Al 0.1 CoCrFeNi high-entropy alloy by synergistic effect of nanotwins and dislocations

Effect of Cryogenic Treatment on Microstructure and Mechanical Properties of Al0.6CrFe2Ni2 Dual-Phase High-Entropy Alloy

Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0.2 high-entropy alloys via energetically-tuning polymorphous precipitates

High-entropy alloys: a review of mechanical properties and deformation mechanisms at cryogenic temperatures

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Cryogenic Strengthening of Fe27Co24Ni23Cr26 High-Entropy Alloys Via Hierarchical Nanotwin-Driven Mechanism