Abstract:The study of alloys exhibiting noteworthy strength-ductility synergy at ambient and cryogenic temperatures has been a persistent area of interest in materials engineering. This interest extends to the recent development of high-entropy alloys (HEAs). The current investigation delves into the impact of diverse thermo-mechanical treatments on the phase and microstructure evolution in a face-centered cubic (FCC) Al7.5Co20.5Fe24Ni24Cr24 HEA. The transition from solid-solution annealing to recrystallization annealing leads to the formation of the desired hierarchical B2+L12+ σ precipitates, accompanied by a heterogeneous FCC matrix. The initiation of the B2 phase originates from nucleation on defect-rich sites, such as deformation bands. However, the coherent L12 phase homogeneously forms in the FCC matrix at intermediate temperature aging, as these sites are scarce or occupied. A heterogeneous structure emerges from the transition in annealing temperatures and the pinning effect of the B2 precipitates. The resulting heterogeneous structure exhibits an exceptional strength-ductility synergy at both room and liquid nitrogen (LN2) temperatures. This is evident in its mechanical properties with a yield strength of ∼717 MPa / ∼1109 MPa, an ultimate tensile strength of ∼1086 MPa / ∼1609 MPa, and an elongation of ∼34.3 % / ∼43.2 % at room / LN2 temperatures. The formation of deformation twins (DTs) is facilitated by localized stress buildup from hetero-deformation-induced (HDI) hardening stress at room temperature. The exceptional strength and ductility at LN2 temperature are attributed to a combination of factors. These include a high-density of stacking faults (SFs), DTs, and their interactions, including those with precipitates, SFs-based substructures, and Lomer-Cottrell locks. These multiple deformation mechanisms ensure consistent and sustained strain-hardening even under substantial strain. This paper sheds light on the complex interplay of microstructure, deformation mechanisms, and mechanical properties in the Al7.5Co20.5Fe24Ni24Cr24 HEA, potentially guiding the development of ultra-strong yet ductile alloys for cryogenic applications.

High-entropy Al 0.3 CoCrFeNi Alloy Fibers with High Tensile Strength and Ductility at Ambient and Cryogenic Temperatures

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Strong and ductile CoCrFeNi high-entropy alloy microfibers at ambient and cryogenic temperatures

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure

High temperature tensile properties of as-cast and forged CrMnFeCoNi high entropy alloy

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Enhancing cryogenic yield strength and ductility of the Al 0.1 CoCrFeNi high-entropy alloy by synergistic effect of nanotwins and dislocations

Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations

Microstructure, Mechanical Properties, and Damping Capacity of AlxCoCrFeNi High-Entropy Alloys Prepared by Spark Plasma Sintering

Microstructural Origins for a Strong and Ductile Al0.1CoCrFeNi High-Entropy Alloy with Ultrafine Grains

Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy

High-temperature tensile behavior and constitutive model in Co-free Fe40Mn20Cr20Ni20 high-entropy alloy

Cryogenic Strengthening of Fe27Co24Ni23Cr26 High-Entropy Alloys Via Hierarchical Nanotwin-Driven Mechanism

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

A Novel Metastable FCC High Entropy Alloy with Excellent As-Cast Strength-Ductility Synergy by Utilizing Heterogeneous Structure and Twinning-Induced Plasticity

Designing Nanoparticles-Strengthened High-Entropy Alloys with Simultaneously Enhanced Strength-Ductility Synergy at Both Room and Elevated Temperatures

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Heavy Carbon Alloyed FCC-structured High Entropy Alloy with Excellent Combination of Strength and Ductility

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength