Abstract:We present the development of a single-photon detector and the connected read-out electronics. This `hybrid' detector is based on a vacuum tube, transmission photocathode, microchannel plate and a pixelated CMOS read-out anode encapsulating the analog and digital-front end electronics. This assembly will be capable of detecting up to $10^9$ photons per second with simultaneous measurement of position and time. The pixelated read-out anode used is based on the Timepix4 ASIC ($65~\mathrm{nm}$ CMOS technology) designed in the framework of the Medipix4 collaboration. This ASIC is an array of $512\times448$ pixels distributed on a $55~\mathrm{\mu m}$ square pitch, with a sensitive area of $\sim 7~\mathrm{cm}^2$. It features $50$-$70~\mathrm{e^{-}}$ equivalent noise charge, a maximum rate of $2.5~\mathrm{Ghits/s}$, and allows to time-stamp the leading-edge time and to measure the Time-over-Threshold (ToT) for each pixel. The pixel-cluster position combined with its ToT information will allow to reach $5$-$10~\mathrm{\mu m}$ position resolution. This information can also be used to correct for the leading-edge time-walk achieving a timing resolution of the order of $10~\mathrm{ps}$. The detector will be highly compact thanks to the encapsulated front-end electronics allowing local data processing and digitization. An FPGA-based data acquisition board, placed far from the detector, will receive the detector hits using $16$ electro-optical links operated at $10.24~\mathrm{Gbps}$. The data acquisition board will decode the information and store the relevant data in a server for offline analysis. These performance will allow significant advances in particle physics, life sciences, quantum optics or other emerging fields where the detection of single photons with excellent timing and position resolutions are simultaneously required.

Single-Quantum Measurement With a Multiple-Amplifier Sensing Charge-Coupled Device

Fast Single-Quantum Measurement with a Multi-Amplifier Sensing Charge-Coupled Device

Multi-Amplifier Sensing Charge-coupled Devices for Next Generation Spectroscopy

Achieving Single-Electron Sensitivity at Enhanced Speed in Fully-Depleted CCDs with Double-Gate MOSFETs

Sixteen Multiple-Amplifier Sensing Charge-Coupled Devices and Characterization Techniques Targeting the Next Generation of Astronomical Instruments

Development of a single-photon imaging detector with pixelated anode and integrated digital read-out

Integration of on-chip field-effect transistor switches with dopantless Si/SiGe quantum dots for high-throughput testing

Multimodule microwave assembly for fast readout and charge-noise characterization of silicon quantum dots

Persistent Single-Photon Production by Tunable On-Chip Micromaser with a Superconducting Quantum Circuit

Multi-module microwave assembly for fast read-out and charge noise characterization of silicon quantum dots

Demonstrating the Q-Pix front-end using discrete OpAmp and CMOS transistors

A Bi-CMOS electronic photonic integrated circuit quantum light detector

Improved Single-Shot Qubit Readout Using Twin RF-SET Charge Correlations

Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers

Demonstrating sub-electron noise performance in Single electron Sensitive Readout (SiSeRO) devices

Enhanced quantum sensing with amplification and deamplification

Monolithic Integration of Superconducting-Nanowire Single-Photon Detectors with Josephson Junctions for Scalable Single-photon Sensing

Simple power-efficient preamplifier-shaper channel for readout interface of silicon detectors

Conditional dispersive readout of a CMOS quantum dot via an integrated transistor circuit

Readout-efficient Superconducting Nanowire Single-Photon Imager with Orthogonal Time–amplitude Multiplexing by Hotspot Quantization

MiniCACTUS: A 65 ps Time Resolution Depleted Monolithic CMOS Sensor