Abstract:Using Commercial Off-The-Shelf (COTS) Operational Amplifiers (OpAmps) and Complementary Metal-Oxide Semiconductor (CMOS) transistors, we present a demonstration of the Q-Pix front-end architecture, a novel readout solution for kiloton-scale Liquid Argon Time Projection Chamber (LArTPC) detectors. The Q-Pix scheme employs a Charge-Integrate/Reset process based on the Least Action principle, enabling pixel-scale self-triggering charge collection and processing, minimizing energy consumption, and maximizing data compression. We examine the architecture's sensitivity, linearity, noise, and other features at the circuit board level and draw comparisons to SPICE simulations. Furthermore, we highlight the resemblance between the Q-Pix front-end and Sigma-Delta modulator, emphasizing that digital data processing techniques for Sigma-Delta can be directly applied to Q-Pix, resulting in enhanced signal-to-noise performance. These insights will inform the development of Q-Pix front-end designs in integrated circuits (IC) and guide data collection and processing for future large-scale LArTPC detectors in neutrino physics and other high-energy physics experiments.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a new read - out solution - the Q - Pix architecture for kiloton - scale liquid argon time - projection chamber (LArTPC) detectors. Specifically, through the charge integration/reset process based on the principle of least action, the Q - Pix architecture realizes self - triggered charge collection and processing at the pixel level, aiming to reduce energy consumption and maximize data compression. The paper mainly explores the feasibility of implementing the Q - Pix front - end architecture using commercial off - the - shelf (COTS) operational amplifiers (OpAmps) and complementary metal - oxide - semiconductor (CMOS) transistors, and examines the sensitivity, linearity, noise and other characteristics of this architecture at the circuit board level, while comparing it with SPICE simulations. The paper also emphasizes the similarity between the Q - Pix front - end and the Sigma - Delta modulator, pointing out that the digital signal processing techniques used for the Sigma - Delta modulator can be directly applied to Q - Pix, thereby improving the signal - to - noise ratio performance. These research results will provide guidance for the future development of the Q - Pix front - end design in integrated circuits and optimize the data acquisition and processing of large - scale LArTPC detectors, especially in neutrino physics and other high - energy physics experiments. ### Main problems solved: 1. **Develop a new read - out scheme**: Propose the Q - Pix architecture as a new read - out solution for LArTPC detectors. 2. **Verify feasibility**: Use COTS components (such as OpAmps and CMOS transistors) to verify the practical feasibility of the Q - Pix architecture. 3. **Performance evaluation**: Evaluate the performance of the Q - Pix architecture at the circuit board level, including sensitivity, linearity, noise, etc. 4. **Comparison with Sigma - Delta modulator**: Explore the similarity between the Q - Pix architecture and the Sigma - Delta modulator, and how to use the technical advantages of Sigma - Delta to improve the design of Q - Pix. 5. **Future applications**: Provide guidance for future Q - Pix integrated circuit design and optimize the data acquisition and processing of large - scale LArTPC detectors. ### Key technologies and methods: - **Principle of least action**: The core principle of the Q - Pix architecture, which realizes low - power consumption and efficient data processing through the charge integration/reset process. - **COTS components**: Use off - the - shelf operational amplifiers and CMOS transistors to implement the Q - Pix front - end. - **Performance testing**: Conduct detailed performance tests at the circuit board level, including sensitivity, linearity, noise, etc. - **Comparison with Sigma - Delta modulator**: Through theoretical analysis and experimental verification, show the similarity between the Q - Pix architecture and the Sigma - Delta modulator and its potential advantages. ### Application background: - **LArTPC detector**: The liquid argon time - projection chamber is a high - precision particle detector, widely used in neutrino physics and other high - energy physics experiments. - **Deep Underground Neutrino Experiment (DUNE)**: The next - generation neutrino experiment, aiming to answer fundamental questions about the universe, is the flagship particle physics experiment in the United States in the next decade. Through these studies, the paper provides an important theoretical and experimental basis for the practical application of the Q - Pix architecture in large - scale LArTPC detectors.

Demonstrating the Q-Pix front-end using discrete OpAmp and CMOS transistors

First operation of a multi-channel Q-Pix prototype: measuring transverse electron diffusion in a gas time projection chamber

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

Data Acquisition System for CEPC Vertex Detector Prototype

A Simulation System and Its Applications for Signal Readout of CMOS Pixel Sensors in High Energy Physics Experiments

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Beyond the CMOS sensors: the DoTPiX pixel concept and technology for the International Linear Collider A

Readout Electronics Development Based on an ASIC for PET Detector Using PMT-quadrant-sharing

Design and Development of a Front-End Readout ASIC for APD-Based STCF Electromagnetic Calorimeter

Characteristics of a Multichannel Low-Noise Front-End ASIC for CZT-based Small Animal PET Imaging

Development of a Low Power and High Integration Readout ASIC for Time Projection Chambers in 65 Nm CMOS

Development of the Front-End Electronics for PandaX-III Prototype TPC

An Asynchronous Data-Driven Readout Prototype For Cepc Vertex Detector

Prototype of Front-end Electronics for PandaX-4ton Experiment

A Novel Front-End ASIC with Post Digital Filtering and Calibration for CZT-based PET Detector

SENSROC4: an Multichannel Low-Noise Front-End Readout ASIC Dedicated to CZT Detectors for PET Imaging

Readout Electronics Design for a Cosmic Ray Muon Imaging System

Development of a Pixel Readout ASIC for CZT Detectors for Spectral X-ray Photon-Counting Imaging Applications

A Multi-Channel Front-End ASIC for Pixellated Detectors