Abstract:The Infra-Red Video Bolometer (IRVB) is a diagnostic equipped with an infra-red camera that measures the total radiated power in thousands of LOSs within a large field of view (FOV). Recently validated in MAST-U, it offers a high spatial resolution map of the radiated power in the divertor region, where large gradients are expected. The IRVB's sensing element comprises a thin layer of high Z absorbing material, typically Platinum, usually coated with Carbon to reduce reflections. It is here explored the possibility of using a relatively inert material like Titanium, that can be produced in layers up to 1mum compared to 2.5mum for Pt, and then coat it with Pt of the desired thickness (0.3mum per side here) and Carbon. This leads to a higher temperature signal (2 to 3 times), and better spatial resolution (about 4 times), resulting in higher accuracy in the measured power. This assembly is also expected to improve foil uniformity, as the Pt layer is obtained via deposition rather than mechanical processes. Given its multi-material composition, measuring the thermal properties of the foil assembly is vital. Various methods using a calibrated laser as a heat source have been developed, analysing the temperature profile shape or fitting the calculated laser power for different intensities and frequencies. It is here presented a simpler approach, that relies on analysing the separate components of the foil heat equation for a single laser exposure in a given area. This can then be iterated over the entire foil to capture local deviations.

Infrared imaging bolometer on the HL-2A Tokamak

Infrared Imaging Bolometer for the Hl-2a Tokamak

Microwave Diagnostics System in the HL-2A Tokamak

OV / 4-3 1 Overview of Experimental Results on HL-2 A

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Measurement of Turbulence Propagation Velocity Using Doppler Reflectometer on HL-2A Tokamak

Inversion Of Infrared Imaging Bolometer Based On One-Dimensional And Three-Dimensional Modeling In Hl-2a

Development of imaging bolometers for magnetic fusion reactors (invited)

Development of a Multi-Color Gas Puff Imaging Diagnostic on HL-2A Tokamak.

Optical Design of a Novel Near-Infrared Phase Contrast Imaging (NI-PCI) Diagnostic on the HL-2A Tokamak

Application of Bayesian Tomography Method to the Visible Spectroscopic Diagnostic on HL-2A Tokamak

Development and Preliminary Results of Phase Contrast Imaging Diagnostic on HL-2A

Design Of Phase Contrast Imaging On The Hl-2a Tokamak

The Comparison Between Near-Infrared and Traditional CO2 Phase Contrast Imaging on HL-2A Tokamak

Tomography of Emissivity for Doppler Coherence Imaging Spectroscopy Diagnostic in HL-2A

Increased accuracy and signal-to-noise ratio through recent improvements in Infra-Red Video Bolometer fabrication and calibration

Optics of a Multiple Color Gas Puff Imaging Diagnostic on the HL-2A Tokamak

Optical Path Design of Phase Contrast Imaging on HL-2A Tokamak

Progress of Plasma Density Fluctuation Measurements with Phase Contrast Imaging on HL-2A Tokamak

Development of the Ion Cyclotron Emission Diagnostic on the HL-2A Tokamak

A New Absolute Extreme Ultraviolet Image System Designed for Studying the Radiated Power of the Joint Texas Experimental Tokamak Discharges