Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

High-Efficiency Blue Fluorescence Organic Light-Emitting Diodes with Dpvbi Inserted in the Doping Emmision Layer

High Efficient Undoped Blue Organic Light-Emitting Devices Based on N-BDAVBi

Highly Efficient Blue Fluorescent OLEDs with Doped Double Emitting Layers Based on P-N Heterojunctions

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Efficient white organic light-emitting devices using a thin 4,4′-bis(2,2′-diphenylvinyl)-1,1′-diphenyl layer

Highly Efficient Blue and Warm White Organic Light-Emitting Diodes with a Simplified Structure

Achieving Ultra-High Efficiency by Tuning Hole Transport and Carrier Balance in Fluorescent Blue Organic Light-Emitting Diode with Extremely Simple Structure

High-efficiency Blue-Fluorescence N-BDAVBi-based Organic Light-Emitting Device with Double Emission Layers

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Synergetic interface and morphology modification to achieve highly efficient solution-processed sky-blue organic light-emitting diodes

Efficiency Enhancement of Blue Phosphorescent Organic Light-Emitting Diodes Using Mixed Electron Transport Layer

High-efficiency Non-Doped Deep-Blue Fluorescent Organic Light-Emitting Diodes Based on Carbazole/phenanthroimidazole Derivatives

Highly Efficient Deep Blue Organic Light-Emitting Diodes Based on Imidazole: Significantly Enhanced Performance by Effective Energy Transfer with Negligible Efficiency Roll-Off

Doping-free Hybrid White Organic Light-Emitting Diodes with Fluorescent Blue, Phosphorescent Green and Red Emission Layers

A simple method of fabricating efficient blue organic light-emitting diodes based on a double-dopant and a double-emissive layer with an effective hole-trapping architecture

Blue and White Organic Light-Emitting Diodes Based on 4,4 '-Bis(2,2 ' Diphenyl Vinyl)-1,1 '-Biphenyl

High Efficient Blue Organic Light-Emitting Diodes Based on DSA-ph

Significant Light Extraction and Power Efficiency Enhancement of Organic Light Emitting Diodes by Subwavelength Dielectric-Nanomesh Using Large-area Nanoimprint

A deep-blue emitter with electron transporting property to improve charge balance for organic light-emitting device.

Deep-Blue Organic Light Emitting Diodes Employed Traditional Hole Transporting Material as Emitter

Ambipolar D–A type bifunctional materials with hybridized local and charge-transfer excited state for high performance electroluminescence with EQE of 7.20% and CIEy ∼ 0.06