Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

A simple method of fabricating efficient blue organic light-emitting diodes based on a double-dopant and a double-emissive layer with an effective hole-trapping architecture

Blue Organic Light-emitting Device with Improved Efficiency and Luminance Based on Carriers Balance

Study on Efficient Blue and White Organic Light-emitting Devices

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Increasing the Efficiency of the Blue OLED Device with a Double-Emitting Layer Structure

Efficient Blue Organic Light-Emitting Devices Based on Oligo(Phenylenevinylene)

Enhancement of Performance for Blue Organic Light Emitting Devices by Utilizing an Adjustable Chromaticity Layer

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Efficient Organic Blue Fluorescent Light-Emitting Devices with Improved Carriers' Balance on Emitter Molecules by Constructing Supplementary Light-Emitting Layer

High performance pure blue organic fluorescent electroluminescent devices by utilizing a traditional electron transport material as the emitter

Enhancing color purity and efficiency of white organic light-emitting diodes using a double-emitting layer

Multiple Charge Transfer Disk-Like Emitters with Fast Fluorescence Radiation Rate and High Horizontal Dipole Orientation for Pure Blue Organic Light-Emitting Diodes

High-Efficiency Blue Fluorescence Organic Light-Emitting Diodes with Dpvbi Inserted in the Doping Emmision Layer

High Efficiency Deep-Blue Organic Light-Emitting Diode with A Blue Dye in Low-Polarity Host

High-efficiency Blue-Fluorescence N-BDAVBi-based Organic Light-Emitting Device with Double Emission Layers

Development of a Highly Efficient Hybrid White Organic-Light-Emitting Diode with a Single Emission Layer by Solution Processing

Efficient Deep-Blue Organic Light-Emitting Diodes Employing Doublet Sensitization

High Efficient Blue Organic Light-Emitting Diodes Based on DSA-ph

Highly Efficient Blue Fluorescent OLEDs with Doped Double Emitting Layers Based on P-N Heterojunctions

Improved Chromaticity and Electron Injection in a Blue Organic Light-Emitting Device by Using a Dual Electron-Transport Layer with Hole-Blocking Function