Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

High Efficient Blue Organic Light-Emitting Diodes Based on DSA-ph

High-efficiency Blue Organic Light-Emitting Devices with Thin Layers Based on DSA-ph

Efficient Blue Organic Light-Emitting Devices Based on Oligo(Phenylenevinylene)

High-Efficiency Deep-Blue Organic Light-Emitting Diodes Based on A Thermally Activated Delayed Fluorescence Emitter

High Efficient Undoped Blue Organic Light-Emitting Devices Based on N-BDAVBi

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Blue and white organic light-emitting devices using oligo(phenylenvinylene) as a blue emitter

Blue organic light-emitting diodes with low driving voltage and maximum enhanced power efficiency based on buffer layer MoO3

Blue Organic Light-emitting Device with Improved Efficiency and Luminance Based on Carriers Balance

Improved Power Efficiency of Blue Fluorescent Organic Light-Emitting Diode with Intermixed Host Structure

Achieving Ultra-High Efficiency by Tuning Hole Transport and Carrier Balance in Fluorescent Blue Organic Light-Emitting Diode with Extremely Simple Structure

A Novel Efficient Blue Organic Light Emitting Structure

An Efficient Blue Organic Light Emitting Structure

High Efficiency Blue Phosphorescent Organic Light-Emitting Diode Based on Blend of Hole- and Electron-Transporting Materials As A Co-Host

Efficient Organic Blue Fluorescent Light-Emitting Devices with Improved Carriers' Balance on Emitter Molecules by Constructing Supplementary Light-Emitting Layer

High Performance Blue Organic Light-Emitting Devices Fabricated by Using the Doped Alq 3 in NPB Hole Transmistion Layers

High-efficiency Blue Organic Light-Emitting Devices Based on Phosphorescent Dopant Material

P-201: High Efficiency Organic Light-Emitting Diodes by a Co-Guest Emitter System

A Pure Blue Phosphorescent Organic Light‐Emitting Diode with an External Quantum Efficiency of over 30% by Using a Tandem Device Architecture

High-Efficiency Blue Fluorescence Organic Light-Emitting Diodes with Dpvbi Inserted in the Doping Emmision Layer