Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

High-efficiency Blue-Fluorescence N-BDAVBi-based Organic Light-Emitting Device with Double Emission Layers

High Efficient Undoped Blue Organic Light-Emitting Devices Based on N-BDAVBi

High Efficiency Electrophosphorescent Red Organic Light-Emitting Devices with Double-Emission Layers

High-Efficiency Blue Fluorescence Organic Light-Emitting Diodes with Dpvbi Inserted in the Doping Emmision Layer

Efficient Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Highly Efficient Blue Fluorescent OLEDs with Doped Double Emitting Layers Based on P-N Heterojunctions

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

High Efficiency Blue Phosphorescent Organic Light Emitting Diode Based on Mcp and UGH2 As Host with Double Emitting Layer Structure

High-efficiency Blue Organic Light-Emitting Devices with Thin Layers Based on DSA-ph

A simple method of fabricating efficient blue organic light-emitting diodes based on a double-dopant and a double-emissive layer with an effective hole-trapping architecture

P-201: High Efficiency Organic Light-Emitting Diodes by a Co-Guest Emitter System

A Novel Efficient Blue Organic Light Emitting Structure

Achieving Ultra-High Efficiency by Tuning Hole Transport and Carrier Balance in Fluorescent Blue Organic Light-Emitting Diode with Extremely Simple Structure

Improved Power Efficiency of Blue Fluorescent Organic Light-Emitting Diode with Intermixed Host Structure

Highly Efficient Blue and Warm White Organic Light-Emitting Diodes with a Simplified Structure

Recombination region improvement for reduced efficiency roll-off in phosphorescent OLEDs with dual emissive layers

Efficient Blue Organic Light-Emitting Device Based on N, N′-di(naphth-2-yl)-N, N′-diphenyl-benzidine with an Exciton-Confining Structure

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer

High Efficient Doped Red Organic Light-Emitting Diodes Based on 9,10-di-beta-Naphthylanthracene

Efficient Nondoped Pure Blue Organic Light-Emitting Diodes Based on an Anthracene and 9,9-Diphenyl-9,10-dihydroacridine Derivative