Abstract:It has been considered formerly that the reason why ZnS coating is not able to stand the environmental corrosion is the cross section structure of its column,1 the gaps among the columns and the capillaries formed by the gaps. The gaps among the columns of ZnS coating deposited on the substrate at low temperature are rather big, the packing density is low, so the coating can not have better mechanical pro— perties.2 To obtain ZnS coating with high strength it is necessary to enhance the temperature of the substrate during deposition. But the problem is that the higher the temperature is, the lower the deposition - speed will be. 200°C is nearly the temperature limitation of the substrate at which the deposition can be done. This fact also hinders us to enhance the strength of the coating. Addi tionally, after the temperature of the substrate has been enhanced, the grains of the coating become bigger, and the coating surface becomes more rough. An anti reflecting coating with good optical property must be a film formed by very fine grains. When it serves as a laser coating it must have a uniform and isotropic heat conductivity, therefore the structure formed by fine grians is necessary to enhance laser damage threshold. So it gives rise to inconsistency between the mechanical property and the optical property of the coating. This paper describes a new type of ZnS coating which has been deposited at low temperature, so it possesses fine grains and therefore its optical property is excellent. After annealing, the texture of the coating has been turned from pref erential orientation of (111) surface into that of (iiO),' at the same time, the coating possesses high strength and chemical stability, especially, its laser damage threshold is 1.9 times as high as that of the common one. This coating can be made either on monocrystal line substrate or glass substrate, with a coating area < 200 mm. In the last two years the authors have offered many ZnS coating with high optical properties and high strength as outside surface coating for the laser and thermal imaging systems

Design and Preparation of Sub-Wavelength Antireflective Structures on Zns

Preparation and Protection of ZnS Surface Sub-Wavelength Structure for Infrared Window

Fabrication of an Anti-Reflective Microstructure on ZnS by Femtosecond Laser Bessel Beams

Rapid fabrication of antireflective structures on ZnS surface by spatial shaping femtosecond laser

Micro nano antireflective and hydrophobic hierarchical structures ZnS by femtosecond laser

Design of THz Sub-Wavelength Antireflective Structure on Si Surface

Design and Fabrication of a Novel Reflection Filter.

Efficient fabrication of infrared antireflective microstructures on a curved Diamond-ZnS composite surface by using femtosecond Bessel-like beams

Design of the wideband anti-reflective subwavelength nanostructures

Analysis and fabrication of the two-dimensional periodic anti-reflective subwavelength structure

Antireflection Subwavelength Structures Based on Silicon Nanowires Arrays Fabricated by Metal-Assisted Chemical Etching

Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

Nanowires Array Designed by Means of Two-Dimension Closed-Form Solution for Antireflection

Broadband High-Performance Infrared Antireflection Nanowires Facilely Grown on Ultrafast Laser Structured Cu Surface.

Study on the Mechanism of Zns Anti - Reflecting Coating with High-Strength

Formation of Broadband Antireflective and Superhydrophilic Subwavelength Structures on Fused Silica Using One-Step Self-Masking Reactive Ion Etching

Fabrication of Large Area Subwavelength Antireflection Structures on Si Using Trilayer Resist Nanoimprint Lithography and Liftoff

Subwavelength structures for high power laser antireflection application on fused silica by one-step reactive ion etching

Biomimetic moth-eye nanostructures fabricated by nanosphere lithography in ZnSe enhancing transmission in the mid-infrared

Progress on Ultrafast Laser Fabricating Metal Surface Micro-Nano Antireflection Structures

Durable Broadband and Omnidirectional Ultra-antireflective Surfaces