Abstract:The properties of silica aerogels, and the ability to prepare them by ambient pressure drying, hinge on their chemical surface modification. Until now, quantitative analysis of the surface chemistry has not been possible by state-of-the-art analytical methods. Here, we determine the surface chemistry of six archetypal, ambient pressure dried, hydrophobic silica aerogels and open-porous foams with quantitative 1H, 13C, and 29Si and 1H–29Si heteronuclear solid-state NMR spectroscopy. The quality of the external calibration, the validation by elemental analysis, and the consistency among the 1H, 13C, and 29Si MAS NMR data enable us to robustly quantify the surface chemistry of these classical silica materials. Four aerogels were derived from tetraethoxysilane (TEOS), polyethoxydisiloxane (PEDS), or waterglass precursors and hydrophobized with trimethylsilyl (TMS) groups through immersion in hexamethyldisilazane (HMDZ) in heptane, trimethylchlorosilane (TMCS) in heptane, or hexamethyldisiloxane (HMDSO) in ethanol. The resulting aerogels display remarkably similar chemistries despite their very different precursors (alkoxides, waterglass), hydrophobization agents (HMDZ, TMCS, HMDSO), and gelation and hydrophobization solvents (water, ethanol, heptane). The TMS content is nearly the same (22–27 wt %), the ethoxy content is low (<4 wt %), and the silica speciation displays a narrow range for all four aerogels. The 1H–29Si heteronuclear correlation spectra provide unambiguous evidence for the grafting of the TMS groups on the silica surfaces. Remarkably, the NMR data enable the prediction of the silica particle size to within 1 to 2 nm of that derived by TEM analysis. Two additional, inherently hydrophobic, ambient pressure dried, open-porous silica foams were synthesized from methyltrimethoxysilane (MTMS) and from a MTMS–dimethyldimethoxysilane (DMDMS) mixture. The reduction in the number of bridging oxygens per Si atom, from 3.76 to 3.90 for TEOS, PEDS, or waterglass based aerogels, to 2.86 for the MTMS based open-porous foam, and to 2.48 for the MTMS–DMDMS derived open-porous foam, results in a brittle-to-superflexible transition. Our results highlight the importance of the chemical treatment of the wet gels (hydrophobization and solvent exchange) on the final surface chemistry of silica aerogels.

Effect of Different Reaction Solvents on the Hydrophobic and Structural Properties of Silica Cryogels

Effect of 1,4‐dioxane on Synthesis of Macroporous Poly(n‐isopropylacrylamide) Hydrogels

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Investigation of the Tetraethoxysilane‐derived Sol–gel Process by Rheological Oscillation Test and the Effect of Different Synthetic Parameters

Synthesis of porous silica gel and study on the adsorption of cerium

Effect of different trimethyl silylating agents on the hydrophobic and physical properties of silica aerogels

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Effect of organic hydrophobic groups on the pore structure and thermal properties of waterglass-based silica xerogels

Influence of Drying Procedure on the Mesoporosity and Surface Fractal Dimensions of Silica Xerogels Prepared with Different Agitation Methods

Modulating pore microstructure of silica aerogels dried at ambient pressure by adding N-hexane to the solvent

Micro to mesoporous SiO2xerogels: the effect of acid catalyst type in sol–gel process

Solvent Cavitation during Ambient Pressure Drying of Silica Aerogels

Cosolvent-free sol–gel synthesis of macroporous silica gels from tetramethoxysilane–tetraethoxysilane mixtures

Preparation of Silica Gels in Electrostatic Field

Surface Chemistry of Hydrophobic Silica Aerogels

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel

Effects of synthesis conditions on particle size and pore size of spherical mesoporous silica

Effects of several additives on silica aerogel properties and adsorption performance for n-hexane, carbon tetrachloride and toluene

Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method

Multifractal characteristics of silica xerogels gelated in various evaporation conditions

Mechanical Properties of Silica Aerogels Prepared from A Mixture of Teos and Organo-Alkoxysilanes of Type R1six3