Abstract:In this paper, the competing requirements of material strength, casting formation and residual stress are considered in the design of a large bulkhead integral isothermal forging die using a design approach that incorporates an outer ring plus a die body. Thermal stress assembly was conducted to resolve the various manufacturing issues encountered in the production of this large-scale casting. This paper also proposes a design method for an expansion joint and material-saving holes to homogenize the cross-sectional thickness of the casting die by solving problems associated with defects and hot cracking during the casting process. The finite element method was used based on the equivalent liquid level descending method, the Niyama criterion, etc., to analyze the pouring of the sand model with different risers to choose the casting process. To resolve the occurrence of hot cracks during production, the design was optimized and the process was improved in combining with the simulation analysis result, after which carrying out another finite element analysis and by re-verifying the production process again. The results show that the simulated porosity, shrinkage and stress distribution are in accord with the practical production status. Based on the mechanical properties and a microstructure analysis, the tension strength of the K3 casting die at 950 °C is approximately 635 MPa, and the microstructures are typical dendrites. However, through the simulation, practical production, and analysis of the mechanical properties and microstructure, the die design method proposed in this paper offers benefits in solving casting forming problems and hot cracking of an integral oversized titanium bulkhead casting die, and a K3 superalloy die with a weight of 7.8 tons was successfully cast.

Optimization of Slow-Shot Process for Large Die-Castings

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Optimization of Slow Shot Parameters in a Die Casting Process by Numerical Simulation Technique

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process

Optimization of Valve Body Process Based on HZCAE

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Die Casting Die Design and Process Optimization of Aluminum Alloy Gearbox Shell

Numerical Simulation and Optimization of Casting Process for Complex Pump

Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process

Study on the Influence of Injection Velocity on the Evolution of Hole Defects in Die-Cast Aluminum Alloy

Optimization and Design Based On Numerical Simulation of AZ91D Die Casting Gating and Runner System

Numerical Simulation of Squeeze Casting of Aluminum Alloy Flywheel Housing with Large Wall Thickness Difference and Complex Shape

Optimization of vacuum counter-pressure casting process for an aluminum alloy casing using numerical simulation and defect recognition techniques

Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

Study on the Effects of the Slow Shot Phase on the Flow Patterns of Die-Casting Mold Filling Process

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

The Numerical Simulation of Flow Field of the Slow Shot Phase in the Shot Sleeve