Abstract:Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.

Influence of Initial State on Microstructure of Surface Nanocrystallized Ni3Al

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Effects of Super-gravity Field on Solidification Structure and Microhardness of Al-Ni-Cr Alloy

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment

Microstructure and Thermal Stability of Bulk Nanocrystalline Alloys Produced by Surface Mechanical Attrition Treatment

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Formation and Precipitation Phases of Ni-Al System Intermetallic Surfacing Layers by Light Beam Heating

Microstructure evolution behavior of Ni3Al (γ′) phase in eutectic γ-γ′ of Ni3Al-based alloy

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

Experimental Investigation on Recrystallization Mechanism of a Ni-base Single Crystal Superalloy

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Influence of Heat Treatment on Microstructure of Laser Powder Deposited Ni20Al30Fe Intermetallic Alloy

Effect of heat input on precipitation characteristic and order degree of Ni3Al in light beam surfacing layer

SURFACE MORPHOLOGY AND CRYSTALLIZATION BEHAVIOR-OF AMORPHOUS NiNi88P12 ALLOY FILM

Effect of Recrystallization on Low-Cycle Fatigue Behavior of DZ4 Directionally-Solidified Superalloy

Effect of Thermal Stability of Γ′ Phase on the Recrystallization Behaviors of Ni-based Single Crystal Superalloys

Microstructure Evolution and Mechanical Properties of a Directionally Solidified Nb-Ti-Si-Cr-Al-Hf-Dy Alloy