Abstract:Many GaInN light-emitting diodes (LEDs) are subjected to a great temperature variation during their serving. In these applications, it is advantageous that GaInN LEDs have a weak temperature dependence of forward voltage. However, the factors determining the exact temperature dependence of the forward voltage characteristics are not fully understood. In this paper, two series of GaInN LEDs are prepared for investigating the correlation between the epitaxial structural and the temperature dependence of the forward voltage characteristics. The forward voltage characteristics of samples are studied in a temperature range from 100 K to 350 K. The curves of forward voltage versus temperature (dV/dT) are compared and analyzed. For the three samples in series I, according to the barrier thickness and emitting wavelength, they are designated as blue multiquantum well (MQW) with thin barrier (sample A), blue MQW with thick barrier (sample B), and green barrier with thick barrier (sample C) respectively. Their structures of active region including the insertion layer between n-GaN and MQW, the MQW, and the emitting wavelength are different from each other. However, the same slopes of dV/dT at room temperature (300 K± 50 K) are observed in the samples. Moreover, samples B and C with the same p-type layer design also have the same slopes of dV/dT at cryogenic temperatures. Sample A with a much thinner p-type layer shows a lower slope than samples B and C. Based on the these experimental data, it is deduced that the intrinsic physic properties of active region such as structure and emission wavelength have a little influence on the variation of the slope of dV/dT either at room temperature or at cryogenic temperatures. Moreover, the Mg concentration of the p-GaN main region determines the slope of dV/dT at cryogenic temperatures. Low doping concentration leads to a high slope of dV/dT.#br#In order to find the decisive factor determining the slope of dV/dT at room temperature, three samples in series II are grown. For sample E, at the MQW-EBL (electron blocking layer) interface, the Mg concentration increases very slowly while an abruptly varying doping profile is observed for samples D and F. The slopes of samples D and F are both -1.3 mV·K-1. This is very close to the calculation value of the lower bond for the change in forward voltage (-1.2 mV·K-1). Meanwhile, the slope of sample E is -2.5 mV·K-1, which is much higher than those of samples D and F. Thus, it is suggested that the major factor influencing the slope of dV/dT at room temperature is the Mg doping profile of the initial growth stage of the p-AlGaN electron blocking layer. These phenomena are mainly attributed to the changes of the activation energy of p-AlGaN and p-GaN, since it relies on the doping concentration and temperature. Our findings clarify the roles of active region, p-AlGaN and p-GaN in the temperature dependence of the forward voltage characteristic. More importantly, the results obtained in this study are helpful for optimizing the growth parameters to achieve LED devices with forward voltage that has a low sensitivity to temperature.

Influence of Optical/Electrical Excitating Style on the Deality Factor of AlGaInP and GaN-based LEDs

Current-voltage Characteristics of Light-Emitting Diodes under Optical and Electrical Excitation

Study of Electrical and Optical Properties of InGaN/AlGaN Double Heterostructure Blue Light Emitting Diodes

Optical Mode Pattern Study of GaN LEDs with and Without Top Nano-Gratings

Study on Optical Properties and Internal Quantum Efficiency Measurement of GaN-based Green LEDs

Optical Performance of N-Face AlGaN Ultraviolet Light Emitting Diodes

Device Simulation on GaN‐LED Operating in Noncarrier Injection Mode for Performance Improvement by Enhancing the Tunneling Effect in Multiquantum Wells

Connections of current/voltage characteristics and photoluminescence performances in LEDs

Optical Properties of GaN-Based Green Light-Emitting Diodes Influenced by Low-Temperature p-GaN Layer

Power-Dependent Optical Characterization of the InGaN/GaN-Based Micro-Light-Emitting-Diode (LED) in High Spatial Resolution

The Influences of Sputtered AlN Buffer Layer on AlInGaN Based Blue and Near‐ultraviolet Light Emitting Diodes

Influences of P-Type Layer Structure and Doping Profile on the Temperature Dependence of the Foward Voltage Characteristic of Gainn Light-Emitting Diode

Impact of Nanowire Geometry on the Carrier Transport in GaN/InGaN Axial Nanowire Light‐emitting Diodes

Excitation-dependent Spatially Resolved Photoluminescence in InGaN/GaN LEDs with Air-Cavity Arrays Grown on Patterned Sapphire Substrates

On the Carrier Injection Efficiency and Thermal Property of InGaN/GaN Axial Nanowire Light Emitting Diodes

Influence of Thickness of p-InGaN Layer on the Device Physics and Material Qualities of GaN-Based LEDs With p-GaN/ InGaN Heterojunction

Study of Predicting the Performance of I-V Curves Through Photoluminescence Spectral Characteristics

Influence of AlGaN Electron Blocking Layer on Modulation Bandwidth of GaN-Based Light Emitting Diodes

Study on Light Extraction Efficiency of GaN-based Light-emitting Diode Chips

Effect of ICP etching of p-GaN layer on the optical and electrical characteristics of GaN-based LEDs

Numerical Investigation on the Performance Enhancement of InGaN/GaN Light‐Emitting Diodes with a Novel p‐i‐n Electron‐Blocking Layer