Abstract:During the cold drawing process, pearlite lamellae turn to the drawing direction to form ferrite fiber texture; the cementite lamellae are divided into a multilayer structure, and the dissolution of cementite lamellae in some regions results in the lattice expansion of ferrite phase and the occurrence of neck‐down regions in the cementite lamellae. The microstructure, texture, and dislocation configuration of cold‐drawn pearlitic steel wires were investigated by scanning electron microscopy (SEM), electron backscattering diffraction (EBSD), and transmission electron microscopy (TEM). In addition, Fe/Fe3C interface structure at the atomic level was clearly observed and analyzed by high‐resolution TEM (HRTEM), and the microscopic deformation mechanism of cementite lamellae at different drawing strains is revealed. The results show that pearlite lamellae turn to the drawing direction to form ferrite fiber texture, and the cementite and ferrite lamellae are simultaneously thinned with the increase of drawing strain. During the cold drawing process, shear‐bands(S‐bands) are formed in the cementite lamellae; the dislocation of ferrite transits from single slip to multi‐slip stage, and the dislocation density increases. After drawing, the lattice structures of cementite and ferrite phases show the evolution from single‐crystal to polycrystal, and the cementite lamellae are divided into a multilayer structure: central relative large‐size cementite crystal and outside relative small‐size cementite crystal layer; the dissolution of cementite lamellae in some regions results in the lattice expansion of ferrite phase and the occurrence of neck‐down regions in the cementite lamellae.

Study on Dislocation Slips in Ferrite and Deformation of Cementite in Cold Drawn Pearlitic Steel Wires from Medium to High Strain

Cementite Deformation and Dissolution in a Cold-Drawn Pearlitic Steel Wire

Evolution of Cementite Morphology in Pearlitic Steel Wire During Wet Wire Drawing

Characterization of the Microstructure in Drawn Pearlitic Steel Wires

Three Distinct Deformation Behaviors of Cementite Lamellae in a Cold-Drawn Pearlitic Wire

High deformation and delamination mechanisms explained through mesoscale and nanoscale phenomena in pearlitic steel wires

Evolution of Microstructure and Fe/Fe3C Interface Structure in Cold‐Drawn Pearlitic Steel Wires

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

In Situ Study of Cementite Deformation and Its Fracture Mechanism in Pearlitic Steels

EVOLUTIONS OF MICROSTRUCTURE AND FERRITIC MICRO--ORIENTATION AND TEXTURE IN A PEARLITIC STEEL WIRE DURING COLD DRAWING

Microstructural Dependence of Anisotropic Fracture Mechanisms in Cold-Drawn Pearlitic Steels

Understanding ferrite deformation caused by austenite to martensite transformation in dual phase steels

Hierarchical Structures in Cold-Drawn Pearlitic Steel Wire

Deformation of Fe and Ag Precipitates in Cu Matrix

Structure of deformed ferrite–austenite stainless steel

Strain-hardening characteristics of ferrite layers in pearlite microstructure

Effect of Cold Drawing Deformation on Themicrostructure and Evolution of Texture of Near Eutectoid Pearlitic Steel

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Experimental Analysis of Wire Drawing Influence on Microstructure, Texture, and Mechanical Properties of High‐Carbon Steel for Prestressing Strand

Residual Stress in the Cementite Phase of Cold Drawn Pearlite*