Abstract:Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing technology. Electrical conductivity of the polymers can be improved by blending with carbon nanotubes. In this work, formulations of acid functionalised multiwall carbon nanotubes (f-MWCNT) and poly (ethylenedioxythiophene) [PEDOT]: polystyrene sulphonate [PSS] were processed, and thin films were prepared on plastic substrates. Conductivity of PEDOT: PSS increased almost four orders of magnitude after adding f-MWCNT. Work function of PEDOT:PSS/f-MWCNT films was ~ 0.5eV higher as compared to the work function of pure PEDOT:PSS films, determined by Kelvin probe method. Field-effect transistors source-drain electrodes were prepared on PET plastic substrates where PEDOT:PSS/f-MWCNT were patterned using laser ablation at 44mJ/pulse energy to define 36 micron electrode separation. Silicon nanowires were deposited using dielectrophoresis alignment technique to bridge the PEDOT:PSS/f-MWCNT laser patterned electrodes. Finally, top-gated nanowire field effect transistors were completed by depositing parylene C as polymer gate dielectric and gold as the top-gate electrode. Transistor characteristics showed p-type conduction with excellent gate electrode coupling, with an ON/OFF ratio of ~ 200. Thereby, we demonstrate the feasibility of using high workfunction, printable PEDOT:PSS/MWCNT composite inks for patterning source/drain electrodes for nanowire transistors on flexible substrates.

Fabrication of Patterned Polymer Nanowire Arrays.

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

A General Approach for Fabricating Arc‐Shaped Composite Nanowire Arrays by Pulsed Laser Deposition

Fabrication of GaAs Nanowires by Colloidal Lithography and Dry Etching

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

OS1503 Development of Highly Ordered Silicon Nanowire Array

Fabrication of Silicon Nanowire Arrays with Controlled Diameter, Length, and Density

Fabrication of polyimide nanowires array and research on the wetting mechanism

Fabrication and Properties of Large-Area Silicon Nanowire Arrays

Tailoring Two-Dimensional Nanoparticle Arrays into Various Patterns

Mask-Free Patterning of High-Conductivity Metal Nanowires in Open Air by Spatially Modulated Femtosecond Laser Pulses

Fabrication of Conducting Si Nanowire Arrays

Large-area and Uniform Amorphous Metallic Nanowire Arrays Prepared by Die Nanoimprinting

3D Nanowire Arrays by Nanoimprint lithography and Mechanical Buckling

Laser-assisted simultaneous transfer and patterning of vertically aligned carbon nanotube arrays on polymer substrates for flexible devices

Fabrication of Carbon Nanotube Arrays for Field Emission and Sensor Devices by Nanoimprint Lithography

Laser patterned polymer/nanotube composite electrodes for nanowire transistors on flexible substrates

Fabrication of Polymer Composite Fibers Embedding Ultra-Long Micro/Nanowires

Patterned Growth of Single-Crystal 3, 4, 9, 10-Perylenetetracarboxylic Dianhydride Nanowire Arrays for Field-Emission and Optoelectronic Devices.

Fabrication Of Polydiacetylene Nanowires By Associated Self-Polymerization And Self-Assembly Processes For Efficient Field Emission Properties