Abstract:The SiCf/SiC composites have been manufactured by a hybrid route combining chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) techniques. A relatively low deposition rate of CVI SiC matrix is favored ascribing to that its rapid deposition tends to cause a ‘surface sealing’ effect, which generates plenty of closed pores and severely damages the microstructural homogeneity of final composites. For a given fiber preform, there exists an optimized value of CVI SiC matrix to be introduced, at which the flexural strength of resultant composites reaches a peak value, which is almost twice of that for composites manufactured from the single PIP or CVI route. Further, this optimized CVI SiC amount is unveiled to be determined by a critical thickness t 0, which relates to the average fiber distance in fiber preforms. While the deposited SiC thickness on fibers exceeds t 0, closed pores will be generated, hence damaging the microstructural homogeneity of final composites. By applying an optimized CVI SiC deposition rate and amount, the prepared SiCf/SiC composites exhibit increased densities, reduced porosity, superior mechanical properties, increased microstructural homogeneity and thus reduced mechanical property deviations, suggesting a hybrid CVI and PIP route is a promising technique to manufacture SiCf/SiC composites for industrial applications.

Mechanical Properties and Microstructure of KD-1 SiCf/SiC Composites Fabricated by Vapor Silicon Infiltration

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Microstructure, Mechanical Properties and Reaction Mechanism of Kd-1 Sicf/Sic Composites Fabricated by Chemical Vapor Infiltration and Vapor Silicon Infiltration

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Study on the Properties of SiCf/SiC Composites Fabricated by Vapor Silicon Infiltration

Fabrication of SiCf/SiC Composites by Chemical Vapor Infiltration and Vapor Silicon Infiltration

Mechanical and Dielectric Properties of SiC F /sic Composites Fabricated by PIP Combined with CIP Process

Fabrication of SiC/SiC Composites by Improved PIP Processing with a New Precursor Polymers

Study of CVD SiC Coated SiC Fiber Reinforced SiC Composite

Mechanical Properties of the SiCf/SiC Composites Reinforced with KD-I and KD-II Fibers Fabricated Assisted by a Microwave Heating Method

Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites

KD-S SiC f /SiC composites with BN interface fabricated by polymer infiltration and pyrolysis process

Fabrication and characterization of 2.5D and 3D SiCf/SiC composites

Mechanical properties and oxidation resistance of SiC f/CVI-SiC composites with PIP-SiC interphase

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

Further Understanding of the Improved Mechanical Properties for SiCf/BN/SiC Composites Prepared by CVI+PIP Hybrid Technique: Application of Micro-Mechanical Methods

STRUCTURE AND MECHANICAL PROPERTIES OF C/SIC COMPOSITES BY REACTIVE MELT INFILTRATION

Microstructure and Mechanical Properties of Three-Dimensional Carbon/Silicon Carbide Composites Fabricated by Chemical Vapor Infiltration

Low-cost C/SiC Composites Prepared by CVI+Pressure-PIP Hybrid Process

Fabrication of SiCf/SiC Composite with in Situ Grown SiC Nanowire by Polymer and Infiltration Pyrolysis Process