Abstract:High-volume-fraction SiC/Al (HVF-SiC/Al) composites have a wide range of applications in aerospace, optics, automotive and electronic packaging. However, because the hardness, brittleness and wear resistance increase with the increase in the volume fraction, it is difficult for traditional methods such as machining, to process HVF-SiC/Al composites to complex components. Therefore, in this paper, a novel method of the hybrid additive manufacturing is proposed to fabricate complex-structures SiC/Al composite parts. The effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of HVF-SiC/Al composites is investigated. The results show that the mechanical properties of the SiC preforms can be effctively enhanced by the PIP process, and this enhancement makes the SiC preforms meet the conditions for subsequent vacuum-pressure infiltration. The mechanical property of HVF-SiC/Al composites show a huge increase when in creasing the volume fraction of SiC. In particular, the flexural strength of HVF-SiC/Al composites increased from 202.28 MPa to 380.87 MPa, and the coefficient of thermal expansion (CTE) has also been reduced from 11.80 to 6.28 × 10 -6 /K, when the volume fraction of SiC increases from 42 to 80 vol%. For optimise the PIP process in the future, three theoretical models are used to predict the relationship between the CTE and the volume fraction of SiC. The results show that the experimental data are more consistent with the predicted values based on the Kerner's model, but deviate from the Rule-of-mixture (ROM) and Turner's models. Importantly, the complex-structures SiC/Al composite parts was successfully fabricated by this hybrid additive manufacturing.

Fabrication and characterization of 2.5D and 3D SiCf/SiC composites

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Fabrication of 3D-SiC/aluminum alloy interpenetrating composites by DIW and pressureless infiltration

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication of dense Cf/SiC ceramic matrix composites using 3D printing and PIP with short carbon fibre as a toughening material

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Preparation and Properties of C/SiC Composites Reinforced by High Thermal Conductivity Graphite Films

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties

Mechanical and ablation properties of 3D orthogonal woven C/C-SiC composite based on high-solid-loading slurry impregnation

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires