Abstract:Self-assembly growth of quasi-1D nanowires (NWs) has been a popular, high yield and low cost technology to fabricate ideal semiconducting channels for fin-like field effect transistors or thin film transistors (TFTs). However, a technical challenge to implementing this approach for large scale electronic applications arises from the fundamental difficulty in collecting and positioning these tiny 1D building blocks into precise locations for convenient electric connection and integration. This is particularly true when the SiNWs were grown with gas-feeding vapor-liquid-solid (VLS) approach, where the as-produced SiNWs are typically standing ones on substrate, and thus require further delicate manipulations to arrange them on planar architecture. Fortunately, this challenge can be addressed by adopting a self-assembly in-plane solid-liquid-solid (IPSLS) growth of Si nanowires (SiNWs), where a thin film of amorphous Si (a-Si) is fed as precursor layer to drive the indium (In) or tin (Sn) nano-droplets to move and produce well-defined crystalline SiNWs behind.[1] Remarkably, a precise control of the location, the growth routine and the geometry of the SiNW channels can be accomplished via a simple low temperature (<350 oC) process in conventional plasma enhanced chemical vapor deposition (PECVD) system. We will first demonstrate a reliable batch-manufacturing of parallel SiNW arrays upon glass substrates, which can serve as high mobility channels in fin-like thin film transistors (Fin-TFTs) for large area display application. Specifically, the SiNWs Fin-FETs achieve a high hole mobility of >150 cm2V–1s–1, on/off ratio >106 and excellent subthreshold swing of 120 mV/dec. In addition, the tiny SiNWs, of ~60 nm in diameter and 2 μm apart grown on glass substrate, are transparent to visible light.[2] Furthermore, we will show that the geometry degree of freedom can also be programmed during the in-plane growth of SiNWs.[3,4,5] Finally, an alloy mixture or amorphous bilayer feeding control will be presented, which can help to achieve a self-automated phase-separation and diameter modulation in a unique Si/Ge superlattice nanowire structure. There results could indicate a promising strategy to tailor the Si or SiGe nanowires for high perfomance large area electronics. References [1] L. Yu, et al., Phys. Rev. Lett. 102, 125501 (2009). [2] M. Xu et al., Nanoscale 9, 10350 (2017). [3] Z. Xue et al., Adv. Func. Mater. 26, 5352 (2016). [4] Z. Xue et al., Nature commun. 7, 12836 (2016). [5] Z. Xue et al., Nano Lett. 17, 7638 (2017)

In Situ Nanoscale Refinement by Highly Controllable Etching of the (111) Silicon Crystal Plane and Its Influence on the Enhanced Electrical Property of A Silicon Nanowire

Selective etching of n-type silicon in pn junction structure in hydrofluoric acid and its application in silicon nanowire fabrication.

High-fidelity Moulding Growth and Cross-section Shaping of Ultrathin Monocrystalline Silicon Nanowires

Tiny silicon nano-wires synthesis on silicon wafers

OS1503 Development of Highly Ordered Silicon Nanowire Array

Facile Morphological Control of Single-Crystalline Silicon Nanowires

Top-down Fabricated Silicon-Nanowire-based Field-Effect Transistor Device on a (111) Silicon Wafer.

Performance Improvement of Planar Silicon Nanowire Field Effect Transistors Via Catalyst Atom Doping Control

Rectangular Suspended Single Crystal Si Nanowire with (001) Planes and <001> Direction Developed Via TMAH Wet Chemical Etching

Fabrication of Single‐Crystalline Silicon Nanowires by Scratching a Silicon Surface with Catalytic Metal Particles

In-Plane Solid-Liquid-Solid Growth and Engineering of Si and Si/Ge Nanowires for Integratable High Performance Fin-like Thin Film Transistors

Deterministic deployment of in-plane silicon nanowires for high performance large area electronics

Terrace-confined guided growth of high-density ultrathin silicon nanowire array for large area electronics

Aligned Silicon Nanowires with Fine‐tunable Tilting Angles by Metal‐assisted Chemical Etching on Off‐cut Wafers

Fabrication and characterization of silicon nanostructures based on metal-assisted chemical etching

Fabricating Vertically Aligned Sub-20 Nm Si Nanowire Arrays by Chemical Etching and Thermal Oxidation

Precise morphology control of in-plane silicon nanowires via a simple plasma pre-treatment

High-Quality Recrystallization of Amorphous Silicon on Si (100) Induced via Laser Annealing at the Nanoscale

Tunable field emission properties of well-aligned silicon nanowires with controlled aspect ratio and proximity

In-plane Epitaxial Growth of Silicon Nanowires and Junction Formation on Si(100) Substrates.

Electric Double Layer Effect in a Nano-Scale SiO2sacrificial Layer Etching Process and Its Application in Nanowire Fabrication