Abstract:PURPOSE:Using sandblast, double acid-etching and H(2)O(2)/HCl solution treatment to establish a new implant surface, and to analyze the surface's morphology.METHODS:After being polished, sandblasted, cleaned, the titanium specimens were divided into six groups, i.e.A to F group. The specimens of group A were treated with low concentration of HF/HNO(3) solution, Group B was treated with low concentration of HF/HNO(3) solution and then H(2)SO(4)/HCl solution, Group C was treated after Group B and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequently heated at 400degrees centigrade for 1 hour. Group D was treated with high concentration of HF/HNO(3) solution, Group E was treated after Group D and then H(2)SO(4)/HCl solution, Group F was treated after E group and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequenty heated at 400degrees centigrade for 1 hour.RESULTS:The titanium surface sandblasted and ultrasonically cleaned exhibited a great deal of particles. The titanium plates treated with low concentration of HF/HNO(3) solution still had some particles, but there were much nano-holes on the titanium surface. The titanium plates treated with high concentration of HF/HNO(3) solution had no particles on the surface, but showed much micron-holes on the titanium surface. The titanium plates treated with H(2)SO(4)/HCl solution after HF/HNO(3) solution etching had all particles removed and got multilevel holes on the surface.The last H(2)O(2)/HCl method produced an anatase titania gel layer on the specimen surface.CONCLUSION:By altering the concentration of HF/HNO(3) solution, we could make different sizes of apertures on the titanium surface. Double acid-etching can remove all sandblasting particles embedded in titanium surfaces and form multilevel holes. The H(2)O(2)/HCl method can turn the rough non- crystallographic TiO(2) layer into the anatase titania gel layer.

Effect of Different Acid Treatment on Surface Characteristics of Titanium Alloy

Bioactive treatment of titanium surface using a H2O2/HCl solution

The Preparation of the Multilevel Holes and Analysis of the Pure Titanium Surface

Influence of Surface Treatments Developed for Oral Implants on the Physical and Biological Properties of Titanium. (I) Surface Characterization.

[The effect of surface modification strategies on biological activity of titanium implant]

Effects of various acids treatment on the properties of titanium substrate

THE EFFECTS OF MODIFIED SANDBIASTING SURFACE TREATMENT ON THE PHYSIOCHEMICAL CHARACTERISTICS OF TITANIUM SURFACE

Surface characterization of titanium-based implant materials

Dual effects of acid etching on cell responses and mechanical properties of porous titanium with controllable open-porous structure.

Surface characterization of implant materials c.p. Ti, Ti-6Al-7Nb and Ti-6Al-4V with different pretreatments

Micro/Nanoscale Surface Modification of Ti6Al4V Alloy for Implant Applications

Cell Response of Titanium Implant with a Roughened Surface Containing Titanium Hydride: an in Vitro Study

Effect of Acid-Etching Time on Surface Characteristics of Implant

Effects of acid-alkali treatment on bioactivity and osteoinduction of porous titanium: An in vitro study

Surface Properties and In Vitro Corrosion Studies of Blasted and Thermally Treated Ti6Al4V Alloy for Bioimplant Applications

Microstructure Evolution and the Influence of Hydrofluoric Acid Treatment on the Surfaces of Commercial Pure Ti after Ecae

Enhanced Bioactivity of Sandblasted and Acid-Etched Titanium Surfaces

Influence of ultrasonic shot peening on the surface acid etching behavior of pure titanium

Effect of Surface Chemistry and Topological Structure of Modified Titanium Via Hybrid Method of Sand Blasting, Acid-Etching and Mixed Alkali Treatment for Cytological Behavior

Preparation of Microstructure Laser Ablation and Multiple Acid-Etching Composites on the Surfaces of Medical Titanium Alloy TC4 by Laser Ablation and Multiple Acid-Etching, and Study of Frictional Properties of the Processed Surfaces

In Vitro And In Vivo Evaluation Of Sla Titanium Surfaces With Further Alkali Or Hydrogen Peroxide And Heat Treatment