Abstract:Objective: To investigate the effects of hydrophilic treatment on the surface morphology and surface properties of pure titanium and titanium-zirconium alloy implants, and to provide reference for the studies of implant surface modification. Methods: The pure titanium group, the hydrophilic pure titanium group, the titanium zirconium alloy group and the hydrophilic titanium-zirconium alloy group were prepared by sandblasting and acid-etching or hydrophilic sandblasting and acid-etching, (11 specimens in each group). The surface morphology and surface properties of four types of titanium specimens were analyzed by surface contact angle meter, scanning electron microscope (SEM), optical profilometer, atomic force microscope (AFM) and Raman spectrometer. Results: The surface contact angles of hydrophilic pure titanium and hydrophilic titanium-zirconium alloy were 1.6°±0.3° and 1.5°±0.2°, and the surface contact angles of pure titanium and titanium-zirconium alloy were 101.4°±4.6° and 96.2°±3.0°, respectively. SEM showed that the nano-protrusions on the surface of pure titanium and titanium-zirconium alloys were less or even absent, while the nano-protrusions on the surface of hydrophilic pure titanium and hydrophilic titanium-zirconium alloys were relatively more; the nano-protrusions on the surface of hydrophilic pure titanium surface were small and dense relatively, but the nano-protrusions of the hydrophilic titanium-zirconium alloy had large diameters and were dispersed relatively. The optical profiler and AFM showed that the surface roughness of hydrophilic pure titanium and hydrophilic titanium-zirconium alloy was significantly higher than that of pure titanium and titanium-zirconium alloy (P<0.05). Raman spectroscopy showed that only the amorphous TiO(2) was present on the surface of the pure titanium group, while the rutile TiO(2) characteristic peak was observed in the other three groups, but the lateral inhomogeneity was observed. After Raman shift 610 cm(-1), the Raman spectra of four groups were similar. Conclusions: Hydrophilic sandblasting and acid-etching treatment can improve the surface hydrophilicity and surface roughness of pure titanium and titanium zirconium alloy, and improve the surface properties of pure titanium and titanium zirconium alloy implants.

The Preparation of the Multilevel Holes and Analysis of the Pure Titanium Surface

Bioactive treatment of titanium surface using a H2O2/HCl solution

Method of preparing TiSrO3 coating on surface of titanium implant

Cell Response of Titanium Implant with a Roughened Surface Containing Titanium Hydride: an in Vitro Study

Preparation and in Vitro Biological Evaluation of Multi-Level Surface Porous Titanium via Two-Step Anodic Oxidation

Micro/nano hierarchical structured titanium treated by NH4OH/H2O2 for enhancing cell response.

Micro/nano Hierarchical Structured Titanium Treated by NH4OH/H2O2 for Enhancing Cell Response

Effect of Different Acid Treatment on Surface Characteristics of Titanium Alloy

Preparation of Hierarchical Porous Structure on Ti Surface and Bioactivity

Cell Responses to Titanium Treated by a Sandblast-Free Method for Implant Applications.

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Early bone response to sandblasted, dual acid-etched and H2O2/HCl treated titanium implants: an experimental study in the rabbit

Study On Surface Modification Of Medical Titanium Alloy By Sand Blasting And Acid Etching Using Al2o3 With Different Particle Sizes

Preparation, Characterization, in Vitro Bioactivity, and Osteoblast Adhesion of Multi-Level Porous Titania Layer on Titanium by Two-Step Anodization Treatment

Activating Treatment of Titanium Surface and the Cell Corresponding Response

Porous structure preparation and wettability control on titanium implant

Effects of Three Different Etching Methods on Surface Morphology and Element of Pure Titanium

Formation of nanoporous titania on bulk titanium by hybrid surface mechanical attrition treatment

THE EFFECTS OF MODIFIED SANDBIASTING SURFACE TREATMENT ON THE PHYSIOCHEMICAL CHARACTERISTICS OF TITANIUM SURFACE

Influence of Surface Treatments Developed for Oral Implants on the Physical and Biological Properties of Titanium. (I) Surface Characterization.

[Surface morphology and surface properties of Ti and TiZr implant materials]